Sales have increased for Hyundai's under-$35,000 IONIQ 5, totalling 18,395 for the first five months of 2026, reports Electrek, "up 16% from the same period last year." But meanwhile BYD's overseas sales surpassed 160,000 for the first time last month, "up 80% from May 2025 and 19% from the previous record of 135,098 set in April." Through the first five months of 2026, BYD sold 616,263 vehicles overseas. In May, overseas sales accounted for over 41% of BYD's total sales. In several major markets, including the UK, BYD surpassed Tesla and Kia to become the best-selling EV brand through April. "With fuel prices remaining high, more drivers are turning to electric vehicles as a smarter and more economical choice," Bono Ge, BYD UK's Country Manager, said last month. Elsewhere Electrek notes that Toyota's bZ (starting at under $35,000) was the third-best-selling EV in the U.S. in the first three months of 2026, behind only the Tesla Model 3 and Model Y. "Last month, bZ sales doubled from May 2025, with 2,646 units sold." And meanwhile the first Volkswagen ID. Polo and Cupra Raval models "rolled off the production line at the Group's Martorell plant in Spain, the first of several new affordable, mass-market EVs." Starting at €24,995 ($29,000) and €26,000 ($30,100), the ID. Polo and Cupra Raval are the first models from the Group's Electric Urban Car Family... [T]he first customer deliveries are scheduled to begin later this summer and into the fall. Following the ID. Polo and Cupra Raval, Volkswagen will introduce new members to the Electric Urban Car Family, including the ID. Cross, an electric version of the T-Cross, later this year. According to Volkswagen, the ID. Cross will start at around €28,000 ($32,500).

Read more of this story at Slashdot.

Sales have increased for Hyundai's under-$35,000 IONIQ 5, totalling 18,395 for the first five months of 2026, reports Electrek, "up 16% from the same period last year." But meanwhile BYD's overseas sales surpassed 160,000 for the first time last month, "up 80% from May 2025 and 19% from the previous record of 135,098 set in April." Through the first five months of 2026, BYD sold 616,263 vehicles overseas. In May, overseas sales accounted for over 41% of BYD's total sales. In several major markets, including the UK, BYD surpassed Tesla and Kia to become the best-selling EV brand through April. "With fuel prices remaining high, more drivers are turning to electric vehicles as a smarter and more economical choice," Bono Ge, BYD UK's Country Manager, said last month. Elsewhere Electrek notes that Toyota's bZ (starting at under $35,000) was the third-best-selling EV in the U.S. in the first three months of 2026, behind only the Tesla Model 3 and Model Y. "Last month, bZ sales doubled from May 2025, with 2,646 units sold." And meanwhile the first Volkswagen ID. Polo and Cupra Raval models "rolled off the production line at the Group's Martorell plant in Spain, the first of several new affordable, mass-market EVs." Starting at €24,995 ($29,000) and €26,000 ($30,100), the ID. Polo and Cupra Raval are the first models from the Group's Electric Urban Car Family... [T]he first customer deliveries are scheduled to begin later this summer and into the fall. Following the ID. Polo and Cupra Raval, Volkswagen will introduce new members to the Electric Urban Car Family, including the ID. Cross, an electric version of the T-Cross, later this year. According to Volkswagen, the ID. Cross will start at around €28,000 ($32,500).

Read more of this story at Slashdot.

An anonymous reader quotes a report from Wired: Aerodynamic drag is a major "barrier" in high-speed airplanes, automobiles, and bullet trains. This is because a design with less aerodynamic drag allows the aircraft to move at higher speeds with less energy. When an aircraft or car body moves at high speed, a thin layer of air called the "boundary layer" is formed on its surface. This boundary layer has two states: laminar flow, in which air flows in an orderly fashion, and turbulent flow, which involves turbulence. The longer the air stays in the laminar flow state with low friction, the smaller the air resistance becomes, but as the air speed increases, it transitions to turbulent flow. The key to reducing aerodynamic drag is how to delay this transition to turbulence. For more than 80 years, the principle of "the surface of an object must be smooth" has been the basic premise of aeronautical engineering throughout the world in order to suppress the transition to turbulence and reduce aerodynamic drag. This premise was based on the results of a 1940 study by Ichiro Tani, a Japanese aerodynamicist who quantitatively demonstrated the relationship between "surface roughness" (an indicator of the state of the machined surface) and turbulent transition, arguing that surface roughness, which was unavoidable with the manufacturing technology of the time, prevented laminar flow from being realized. However, in 1989 Tani reinterpreted the experimental data on rough-surface pipes obtained by fluid engineer Johann Nikulase in the 1930s, bringing a new perspective that "roughness may not necessarily only promote turbulent transition and increase fluid resistance." Inheriting this idea, a research group led by Yasuaki Kohama of Tohoku University experimentally demonstrated in the 1990s that fibrous rough surfaces, which have fine fibrous irregularities on their surface, have the effect of delaying transition under certain conditions. The same Tohoku University research team recently announced a discovery that significantly advances this trend. Aiko Yakino, associate professor at Tohoku University's Institute of Fluid Science, and her research group were the first in the world to demonstrate that aerodynamic drag can be reduced by up to 43.6 percent simply by applying distributed micro-roughness (DMR), a surface roughness so fine and irregular that it cannot be distinguished by the naked eye. This technology is fundamentally different from the "rivulet (shark skin) process," which is known as a typical aerodynamic drag reduction technology. The rivulet process mimics the fine longitudinal grooves in shark skin, and by carving grooves approximately 0.1 mm wide along the direction of airflow, it aligns the vortices that occur near the wall surface of turbulent airflow areas. DMR, on the other hand, delays the switch from laminar to turbulent flow by means of random and minute irregularities. The flow zones it affects and the mechanisms it employs are based on completely different concepts.

Read more of this story at Slashdot.

An anonymous reader quotes a report from Reuters: Ride-share drivers for app-based companies such as Uber and Lyft have unionized in Massachusetts, forming what state officials and labor leaders said was the first officially recognized organization in the U.S. to represent such gig workers. The newly formed App Drivers Union received certification from the Massachusetts Department of Labor Relations on Friday to represent nearly 70,000 ride-share drivers operating as independent contractors in the state. "It changes the game for ride-share workers across this country," Massachusetts Governor Maura Healey, a Democrat, said at a rally with drivers and labor activists in Boston on Tuesday. The certification occurred after voters in November 2024 approved a ballot measure that created a novel framework to allow drivers for companies like Uber and Lyft to organize and bargain collectively over pay and benefits. That vote followed a years-long, nationwide battle over whether ride-share drivers should be considered independent contractors or employees entitled to benefits and wage protections.

Read more of this story at Slashdot.

Tesla's upcoming Cybercab "has been certified at 165 Wh/mi," reports Electrek — which makes it "the most efficient electric vehicle ever produced — by a wide margin." The next most efficient EV on the market, the Lucid Air Pure, consumes 28% more energy per mile. Tesla VP of Vehicle Engineering Lars Moravy confirmed the figure, which represents a certified rating — not a marketing claim or internal target. It's an impressive achievement, but it comes with a massive asterisk: Tesla accomplished this by building a tiny two-seat robotaxi with no steering wheel, no pedals, and a sub-50 kWh battery pack... Even Tesla's own Model 3 — one of the most efficient passenger EVs you can buy — needs nearly a third more energy to cover the same distance... Where the 165 Wh/mi figure genuinely matters is in the economics of running a robotaxi fleet. Energy cost per mile is one of the biggest operating expenses for any ride-hailing service, and the Cybercab's efficiency gives Tesla a structural cost advantage over competitors... The small battery pack also means faster charging times and lower per-vehicle battery costs — both critical for fleet economics. Tesla has said the Cybercab will cost $30,000, and the efficient powertrain is a big part of hitting that price target. Tesla confirmed Cybercab production has started at Giga Texas in April, though the ramp is expected to be slow initially. The company still hasn't solved unsupervised autonomous driving — the first steering wheel-less unit rolled off the line in February, but Tesla's supervised robotaxi fleet currently crashes at roughly four times the rate of human drivers.

Read more of this story at Slashdot.

Long-time Slashdot reader UnknowingFool shares this report from the BBC: Air France and Airbus have been found guilty of manslaughter over a 2009 plane crash which killed 228 people. The Paris Appeals Court found the airline and aircraft manufacturer "solely and entirely responsible" for the incident, in which flight AF447 from Rio de Janeiro to Paris crashed into the Atlantic Ocean. The passenger jet stalled during a storm and plunged into the water, killing all on board. A court had previously cleared the companies in April 2023, but they were found guilty on Thursday after an eight-week trial. Both have repeatedly denied the charges and say they will appeal... The companies have been asked to pay the maximum fine — €225,000 ($261,720; £194,500) each — but some victims' families have criticised the amount as a token penalty... In 2012, French investigators found a combination of technical failure involving ice in the plane's sensors and the pilots' inability to react to the aircraft stalling led to it plunging into the sea. The captain was on a break when the co-pilots became confused by faulty air-speed readings. They then mistakenly pointed the nose of the plane upwards when it stalled, instead of down. Investigators concluded the co-pilots did not have the training to deal with the situation. Pilot training has since been improved and the speed sensors replaced.

Read more of this story at Slashdot.