Happy weekend, everyone. We're deep into camera news season, but the accessory makers haven't been slacking at all. Today, we'll be taking a look at a big update to a solid audio recorder, a new take on the light stand and a host of other accessories – but first, the deals.
Canon deals
Photo: Dale Baskin
Canon's mid-range full-frame camera, the EOS R6 II, is currently on sale for $200 off. When we tested it, we were very impressed with how well-rounded it is, combining excellent autofocus, great ergonomics and solid performance.
Speaking of cameras we were impressed with, the EOS R5 II is also on sale for $300 off its MSRP. It takes everything that's good about the EOS R6II and turns it up to 11, with a higher-resolution sensor, faster burst rates and more.
3 Legged Thing is getting into the light stand market. On the surface, its new product, the Luna, looks like a standard piece of grip equipment, but if you look closer, you'll notice it's made of carbon fiber. The company says this makes it light, stable and compact when folded up. It has a maximum height of 2m (79").
That's not its only trick, though: you can also detach the center column from the legs and use it as a boom pole for recording audio or getting your camera closer to a hard-to-reach subject. While the head features a 3/8"-16 thread, common for lighting and microphones, it's actually retractable: push down the outer sheath, and it'll reveal a 1/4"-20 thread, which can be used to mount a wide variety of accessories.
The Impact 3-stage Baby Folder Roller is just one of the products in the new KeyGrip series. Image: Impact
If you prefer more traditional light stands, Impact has you covered. The company has announced a new KeyGrip lineup, which it says is supposed to provide rugged, flexible designs at a relatively affordable price. The lineup includes everything from small, sturdy stands meant to hold camera sliders to three-stage stands on rollers that can extend up to 3.35m (11') tall.
If you're a videographer who shoots on Sony cameras and have to be absolutely sure your storage media is fast enough for any resolution, codec or framerate, you have a new option. Nextorage has announced its NX-A2Pro series of CFexpress Type A cards, which it says are the first of their kind to comply with the Video Performance Guarantee (VPG) 800 standard. That means the cards can write at least 800MBps of data continuously.
Of course, the cards' peak write speeds are much higher, at 1900 MBps. Both speeds, however, are well above what you'll need today. The manual for Sony's flagship a1 II says that even the camera's highest-bitrate modes only require a VPG200 or higher card. Nextorage says the NX-A2Pro is designed for "the high-end camera market in the future."
If you're not looking for future-proof storage, the company also announced its NX-A2AE line, which has a VPG400 rating. Both cards will be available starting in "late April."
While shooting film gives you a completely analog experience, if you're doing so in 2025, you'll probably want to digitize your photos at some point. The Myriad film holder by Cutasunda, which got a shout-out from PetaPixel this week, promises to help make that process a little easier. It has a diffusion panel to help ensure your film is evenly backlit, and its top panel makes sure your film is flat, even if months in a canister have given it a tendency to curl up. Its adjustable film guides support film sizes from 110 to 6x9, so it'll work with pretty much whatever you're shooting.
It's not a complete package – you'll still need a quality backlight to put behind it, a camera with a macro lens and a tripod – but it plays an important part in bringing your film from the analog world into the digital one.
Zoom's Handy Recorders – especially the H4 and H5 lines – have been popular among videographers for years, as they provide a versatile way to capture audio wherever you are. Now, the H5 has gotten an upgrade: the new H5studio includes an even better stereo microphone capsule, as well as the ability to record in 32-bit float audio, which essentially means you don't have to worry about your audio clipping.
Like the standard H5, the H5studio has a "capsule" system that lets you attach various microphones and inputs to it. It comes standard with a stereo XY capsule that features "the largest mics ever" included in the Handy Recorder lineup, which can capture around 130dB of dynamic range. The recorder's body also features two combination XLR / TRS inputs, line and headphone out jacks, and USB-C. If you swap the capsule, though, you can add two more XLR inputs or even a dual-channel wireless receiver or shotgun microphone. The H5studio can record up to six tracks, which you can monitor via its LCD screen.
Finally, an end to copying and pasting color boards or having to use compound clips.
This week, Apple released an update for its Final Cut Pro editing software. The free 11.1 update includes a few minor improvements and integrates one of the company's new AI features, but the biggest addition is Adjustment Clips. If you've ever edited in Premiere Pro or Davinci Resolve, you'll likely be familiar with the concept: it's a layer you can put over multiple other clips to apply the same effect or transition to them. This can be especially useful with color grading; if you have clips that all need the same grade applied, you can simply apply it to an adjustment clip layered over them rather than having to apply them to each clip individually.
As big as that is, it pales in comparison to what BlackMagic has been working on. The company announced a new version of its Resolve editing software that adds an AI tool for creating animated subtitles, a dedicated keyframe editor and an even easier-to-access audio mixer.
Photo: BlackMagic
Its blockbuster announcement, though, is the Blackmagic Camera 9.5 Update, which is currently in beta but provides a massive upgrade to the autofocus system for the Blackmagic Cinema Camera 6K. When it launched, the camera just had single autofocus – the camera could focus once but wouldn't update if your subject moved. The new update, though, adds continuous autofocus, which will work to keep whatever's under its selected focus point sharp. It also supports tracking autofocus, where it will attempt to keep its focus point on a selected subject, even if it moves or the framing changes, as well as face tracking autofocus. These changes should make the camera substantially more useful for smaller productions or even single-shooter setups with no dedicated focus puller. The company says it'll be bringing the feature to its other large-sensor cameras as well.
A new lens company hailing from China has popped onto the scene, promising even more autofocus lens options for mirrorless cameras. Named SongRaw, the company's slogan states, "Crafted with Dedication, Honoring Your Passion and Love," adding that it "is dedicated to polishing every detail of the craft." To kick things off, it has announced a fast 50mm lens that it claims is the first Chinese 50mm F1.2 full-frame autofocus mirrorless lens.
SongRaw's debut lens is a full-frame offering that provides that classic 50mm focal length with a wide aperture for a shallow depth of field and better low-light performance. The lens features 13 aperture blades, which SongRaw says promises "beautiful bokeh." It offers autofocus powered by a stepping motor, which SongRaw says is compatible with eye-tracking. It can focus as close as 0.52m (20.5") and is compatible with 72mm filters.
The optical design comprises 15 elements in 10 groups. The information on special elements is a bit mixed, with one piece mentioning two aspherical elements and another including two extra-low dispersion elements. It wouldn't be out of the question to see both in the same lens, though. SongRaw didn't provide any details as to the size or weight of the lens.
Image: SongRaw
The lens is marked with "Moonlit," and the company's barebones website includes that branding. Photos of the lens show an aperture ring, along with a switch labeled "click," suggesting the aperture ring can be clicked or de-clicked. There's also an AF/MF switch and what could be a function button.
SongRaw says the 50mm prime lens will be compatible with FE-mount, Z-mount and L-mount, but that it is prioritizing the Sony model. Nikon and L-mount users may need to wait a bit longer. SongRaw is showing the lens off at NAB, so anyone headed to the show could check it out in person. The lens will be priced at around $1000 and should be available by the middle or end of April.
Unfortunately, this Film Friday brings some disappointing news. Price hikes are in the news everywhere right now, and that includes film prices, at least for those in Japan. Earlier this week, Fuji Rumors shared that, along with a redesign of a disposable camera, Fujifilm is increasing the price of its film in Japan.
Fujifilm Japan's press release explains that the prices are increasing because of the costs of making and transporting the film. "As the prices of materials, raw materials, and transportation costs for photographic film continue to rise, we have been working to absorb costs by improving production efficiency and cutting expenses, but as it is difficult to absorb the costs through corporate efforts alone, we will be revising the prices of some of our photographic film products," a machine-translated version of the release states.
Price change date
Selected products
Size
April 1
Color Negative Film
135
Approximately 21% to 22%
April 1
Disposable Film Camera
135
Approximately 44%
April 1
Reversal Film
135/120
Approximately 31-52%
The release says that 35mm color negative film prices have increased by around 21 or 22%, while 35mm and 120mm reversal film prices increased by roughly 31 to 52%. The QuickSnap disposable camera is also around 44% more expensive. While the new prices took effect on April 1, it was not an April Fool's Day joke. A search on Bic Camera, one of Japan's largest electronics retail chains, currently has a single roll of 135 Velvia 50 priced at 6050 yen, or $41.57. If you want a five-pack of 120 Velvia 100 in Japan, you're looking at 23,650 yen, or $162.51.
Color negative film isn't nearly as bad, but it's still extremely expensive. A single roll of 135 Fujifilm 400 – typically considered a beginner-friendly budget option – is listed at 2420 yen, or $16.63. For comparison, that same film is listed at B&H in the US for $8.39.
Fujifilm hasn't said whether the pricing outside of Japan will be affected, but it seems possible that the higher costs will be implemented elsewhere. Given the recent tariffs, that seems especially likely in the US. If you're an analog photographer, it may be a good time to stock up on some film.
Venus Optics released a teaser of sorts in January for its first zoom probe lens, with a promised release date of sometime in Q2 this year. Details were slim at the time, but now, in conjunction with NAB, the company has revealed more information on the unique Probe Zoom macro lens.
The new full-frame probe lens from Laowa uses a modular design with four interchangeable front modules and two rear tubes. The rear tubes offer slightly different focal ranges, coming in at 15-24mm T8 and 15-35mm T12. Laowa says it is the "widest and largest range probe lens" available, with a 110.5° angle of view and a 2.3x zoom range.
Images: Laowa
The four front modules allow users to switch between a direct view, periscope, 35° view, and a new 90° view. Each module can rotate 360° independent of the focus and zoom ring with Laowa's patent-pending rotation design. Combined with the two rear tubes, this set enables eight combinations, making it a versatile option for macro content. The probe is 40cm (15.7") long, helping it reach subjects in tricky locations. Plus, the barrels are waterproof, opening up even more possibilities.
The January announcement promised a Q2 release, but things appear to be slightly delayed. The company now says that it will be available to ship in Q3 of this year, so macro enthusiasts have to wait a bit longer. Laowa did provide some details on pricing now, however. The Probe Zoom Macro 15-24mm T8 Direct View lens will be $3,499, and the 15-35mm T12 Direct View lens will be $3,999. Laowa says more details on the lens and pricing will be announced soon.
In addition to the new lens, Laowa also announced it is offering 10% off select products from April 3 to 13 on the Laowa Cine website and to selected resellers, including B&H.
Press release:
Laowa Debuts Its First-Ever Probe Zoom Macro Lens at NAB Show 2025 & Adds Its New 90-Degree Module to the Set
Las Vegas, US – April 3, 2025 – Laowa, renowned for its legendary probe lenses over the past decade, is proud to announce the debut of its highly anticipated Probe Zoom Macro Lens at NAB Show 2025 in Las Vegas. The new Probe Zoom features two focal lengths – 15-24mm T8 and 15-35mm T12 with 4 interchangeable front modules including the Direct View, Periscope, 35° View and 90° view. The 90-degree module is designed with a user-friendly 360° rotation mechanism while maintaining precise focus and zoom control. Visitors can try on the show at North Hall Booth N2823.
Alongside this groundbreaking innovation, Laowa will also unveil its first-ever broadcast lens and showcase a selection of its newly launched lenses and popular series. Attendees will have the opportunity to experience Laowa’s latest optical advancements firsthand and have a chance to win the popular 10mm f/2.8 Zero-D FF lens on site.
In celebration of Laowa’s continued innovation in the realm of optics, customers around the world can enjoy an exclusive, limited-time 10% online discount on selected products across NAB period, available only on the official laowacine.com website and selected US resellers.
Laowa Probe Zoom Macro Lens: A Revolutionary Addition
The Laowa Probe Zoom Macro Lens set is an innovative addition to Laowa’s industry-renowned Full Frame probe lens lineup, featuring the 15-35mm T12 and 15-24mm T8. Being the widest and largest range probe lens on the market, it boasts a 110.5° angle of view and a 2.3x zoom range for significant changes in magnification and perspective. The 40cm-longest waterproof tubular design empowers filmmakers to capture deep, hard-to-reach subjects with unparalleled flexibility and top-notch image quality.
Key Features:
15mm Ultra-Wide Perspective
2.3x Zoom Range with Parfocal Design
4 Versatile Modules: Direct, Periscope, 35° View and the additional 90° View
Up to 2.3x Magnification for extreme close-ups
Unrivaled Sharpness & Superior Image Quality
Waterproof, Long Tubular Barrel for versatile shooting conditions
360° rotation for front modules
The lens set features a modular design with 4 interchangeable front modules and 2 main barrels, allowing users to switch between Direct View, Periscope, 35° View, with one more 90° perspective announced. The rear tubes come in two focal ranges: 15-24mm T8 and 15-35mm T12, offering 8 unique combinations.
With a maximum T8 aperture, 15mm ultra-wide perspective, up to 2.3x magnification, and a waterproof barrel, this lens excels in extreme close-ups (as close as 5mm), low-light conditions, and underwater filming. It’s a versatile tool for advertising, wildlife documentaries, and cinema production, delivering unmatched storytelling potential.
A unique 360° rotational ring is installed in front of the lens body, this patent-pending front rotation design allows the tube to rotate independently from the focus and zoom ring, and users can produce sweeping and dynamic shots while being able to control the focus and zoom ring.
The Laowa Probe Zoom Macro Lens will debut at NAB Show 2025—visit us for a hands-on experience!
Pricing and Availability
Laowa Probe Zoom Macro Series will be available to ship by 2025 Q3. The US Price for the Probe Zoom Macro 15-24mm T8 – Direct View lens is $3,499 and 15-35mm T12 – Direct View lens is 3,999. Pricing varies in different countries. More details on the price and updates will be announced soon.
ProGrade Digital has announced three new products aimed at making storage extra portable. The company unveiled two highly compact SSDs that each promise fast speeds and excellent reliability, along with a memory card reader meant to work with the iPhone 16 line of phones to unlock 4K 120p recording.
ProGrade CFexpress Type A Mobile Reader
Image: ProGrade
Smartphone cameras are capable of impressive video quality, which is why many content creators rely exclusively on their phones to record video. But those files quickly eat up storage space. Plus, some formats are only unlocked with external recording, such as the iPhone 16 Pro/Pro Max 120 fps ProRes recording mode. The new PGM12 CFexpress Type A mobile card reader from ProGrade aims to make it easier for users to take full advantage of their phone's recording capabilities.
The PGM12 card reader is a single-slot CFexpress Type A reader that ProGrade says offers the same performance as its full-sized card readers despite its more compact size. That means promised transfer rates of up to 1.25GB/s. It features a patented magnetic base and metal mounting plates with a flexible cable, making it feasible to mount to your phone or rig in multiple ways. The card reader is small enough to be attached to the back of an iPhone while also using a MagSafe charger, ensuring you don't run out of storage or battery.
"Our customers can now record video onto low-power, CFexpress Type A memory cards, at the highest possible quality, and not have to worry about running out of storage space, that might be experienced with a fixed capacity storage device," says ProGrade.
The PGM12 reader is available for preorder now for $80 and will ship at the end of April.
The ProGrade PG10.5 Pro Mini SSD is a compact SSD that, like the above card reader, is equipped with ProGrade’s patented magnetic base. It also comes with an adhesive metal plate, so you could mount it to any work surface or to ProGrade PG20 Pro Hub.
It uses USB 4.0 technology, resulting in a promised maximum bus speed of up to 40Gbits/sec. ProGrade says it will offer read speeds of 4000MB/s, a write speed of up to 3500MB/s. It should also provide a sustained write speed of 1250MB/s, which is critical for high-resolution video workflows. It's compatible with Thunderbolt 4, Thunderbolt 3, USB 3.2 and 3.1 Type-C ports.
"The PG10.5’s small physical size and robust design also allow it to be easily removed from the workstation, studio environment, and easily used in more mobile, non-studio environments," said Wes Brewer, CEO and founder of ProGrade.
The PG10.5 Pro Mini SSD is now available for preorder. It comes in 1TB, 2TB and 4TB capacities and is priced at $180, $300 and $550, respectively.
SSDs keep getting smaller, as is the case with the ProGrade PG30 Ultra-Portable SSD. This tiny device looks like a classic thumb drive but should offer better performance and reliability. After all, thumb drives aren't typically meant to be used as working drives, and they often don't last for extended periods, either.
The ProGrade PG30 Ultra-Portable SSD, though, is more up to the needs of creative professionals. It uses USB 3.2 Gen 2 technology, and ProGrade promises read and write speeds of up to 1000MB/s and a sustained write speed of 300MB/s.
The tiny SSD features tethered caps that protect the Type-A and Type-C ports, while the IP65 rating provides water and dust resistance. It's also X-ray and shock-proof and comes with a three-year warranty.
"The PG30’s relatively small die-cast aluminum body, dual USB Type A and C connectors, coupled with an impressive IP65 dust and water rating, make it an ideal choice for all imaging professionals seeking the compatibility and reliability that ProGrade is known for," said Josh Brewer, Product Manager of ProGrade.
The ProGrade PG30 Ultra-Portable SSD will be available for purchase at the end of April and comes in 500GB, 1TB and 2TB capacities.
Nikon announced the Z5 II mirrorless camera last night, but in addition to that announcement was another exciting update for Nikon videographers. The company revealed that Adobe will finally offer support for Nikon's N-Raw video format in Premiere Pro.
N-Raw is Nikon's proprietary 12-bit Raw video format. It supports Rec2020 color gamut and allows users to adjust white balance in post-production, much like what's possible with Raw photo files. As a result, it provides more flexibility during the editing process. Despite that extra data for editing purposes, it also produces smaller file sizes compared to Apple ProRes Raw. It's ideal for those who need editing flexibility while saving space on memory cards and hard drives.
DPReview's 2025 wishlist included increased N-Raw codec support from software makers since such a limited choice of editing programs reduces the value of that in-camera Raw capture. The only other options for editing N-Raw files are DaVinci Resolve and RedCine-X Pro, so it is great to see Adobe getting on board.
While support for N-Raw in Premiere Pro is certainly welcome news, users will have to wait until "the end of 2025." Nikon didn't provide more specifics than that, simply saying it will come with an updated version of Premiere Pro coming later this year.
Press release:
NIKON’S N-RAW VIDEO FORMAT WILL BE SUPPORTED IN ADOBE’S VIDEO EDITING SOFTWARE PREMIERE PRO®
MELVILLE, NY —
Nikon Inc. is pleased to announce that Adobe will add support for Nikon’s N-RAW video format to its video editing software, Premiere Pro®, with a new version scheduled for release by the end of 2025.
N-RAW is Nikon’s proprietary high-quality RAW video format that provides users with a large amount of imaging data in order to enable more freedom and flexibility, including a wider Rec2020 color gamut in 12-bit N-RAW with its billions of colors captured and software-modifiable white balance, in post-production. Adobe Premiere Pro® is a popular video editing software widely used by professional creators and filmmakers, and support for the N-RAW format opens up extensive new possibilities for video and film production using Nikon cameras. Premiere Pro® support for the N-RAW format has been realized via the addition of Nikon N-RAW support to RED’s R3D SDK.
Nikon will continuously meet the needs of those involved in video and film production, contributing to the development of imaging culture, with the hope of expanding possibilities for imaging expression.
When you use DPReview links to buy products, the site may earn a commission.
Makoto Oishi, Yuji Igarashi and TJ Yoneda, all holding the GFX100RF.
GFX100RF | F5 | 1/90 sec | ISO 12800 Cropped and processed in ACR to taste. Photo: Mitchell Clark
Last week, Fujifilm announced the GFX100RF, a fixed-lens camera with a 102MP medium format sensor. The company graciously flew us to Prague to cover the event live, and we got the chance to sit down and discuss the launch with three of the people who helped make it happen: Makoto Oishi, senior manager of GFX product planning, Yuji Igarashi, Manager of Fujifilm's Professional Imaging Group and TJ Yoneda, assistant manager of GFX product planning.
Our conversation mostly centered on the new camera and the design decisions that went into it, but we also talked a bit about the company's content authenticity efforts as well.
Who is the GFX100RF for?
According to Makoto Oishi, the GFX100RF is made for a different kind of photographer than most of the company's other medium-format cameras. "The GFX 100 II and the 100 S II are mainly for current GFX users who shoot landscapes, portraits or commercial. The GFX100RF is a little bit more for street photography or documentary, because we developed this one to be as small and lightweight as possible."
It's designed to be a luxury camera...
Photo: Richard Butler
At first glance, the GFX100RF looks a lot like a larger X100VI, especially with respect to its controls and rangefinder styling. However, according to Oishi, the company didn't set out to design a camera with a family resemblance. "It's not that we didn't care, but we didn't design this camera with too much respect to the X100."
Part of the reasoning is that the GFX100RF is a much more expensive camera than the X100VI, which means it needs to feel more premium. "At the beginning, when we discussed how we should design the camera, we already knew about the price point. So this camera should be more luxurious to match the price point," said Oishi.
"Milled aluminum is the top end of manufacturing"
A major factor in its luxury design is the top plate, which is milled out of a single block of aluminum—it's the first time Fujifilm has used this type of manufacturing process. "Milled aluminum is the top end of manufacturing," said Oishi. Because you're milling from the block, you can have a lot of unique designs—more flexible designs," said Igarashi. Oishi agreed, saying, "With milling, we can develop any complicated, complex shape."
A display at Fujikina showing the stages of production for the GFX100RF's milled aluminum top plate.
Photo: Mitchell Clark
Later, during the Fujikina event, Yoneda told us that turning an aluminum ingot into a GFX100RF top plate takes around five hours. Even the side of the hot shoe mount is milled. "It has many special parts," said Oishi.
The company also redesigned the lens hood, creating an adapter ring that only goes one way, which the rectangular hood then attaches to normally. "With the X100VI, it just attaches by screwing on, which can be quite tough to align. This one has tabs affixed on the lens," so it aligns perfectly every time.
... while still being as compact as possible
"This is not an interchangeable lens, so we can be kind of flexible on the design of the sensor and the lenses," said Yoneda. "So the rear element of the lens is really close to the sensor, which is almost covering the sensor size. That's one of the reasons we can create such a small lens."
"We actually have considered several options for the focal length and aperture, and this was what we can make the most compact lens with the best image quality." It also lets you get away with hand-holding the camera at lower shutter speeds, which is important given the camera's lack of stabilization for the sensor or lens. Unsurprisingly, the exclusions were made to make the camera as small as possible – the company said that adding IBIS would've made the camera noticeably larger and heavier.
Photo: Richard Butler
And if you want a closer field of view? "Since it has the 102-megapixel sensor, we can use the digital teleconverter for the telephoto side," said Yoneda.
As for whether the GFX100RF will ever get add-on optical lenses to change its field of view, similar to those for the X100 series, the company says it thinks the digital teleconverter is the way. "At this moment, we think that because of the 102MP, the digital teleconverter works," said Yoneda. "But depending on the users' feedback, we can, of course, consider any possibility of the wide-angle and teleconverter."
On the aspect ratio dial
The aspect ratio dial has ten options – the nine aspect ratios the camera supports, and a "C" setting that lets you control it with one of the camera's control dials.
Photo: Richard Butler
One of the most prominent features of the GFX100RF is its large dial for controlling the aspect ratio of your JPEGs. While the company's GFX cameras have long let you emulate aspect ratios from some of its most famous medium format film cameras, this is the first one with a dedicated physical control for it. "I think this analog dial is kind of a connection between the digital technology and the film cameras we have," said Igarashi.
"We are trying to grab new customers with respect to our medium format cameras," said Yoneda. "So we thought this camera was the best one to install that kind of homage to those cameras."
"We are trying to grab new customers with respect to our medium format cameras"
It's also part of the company's philosophy of helping you produce pleasing images straight out of camera. "We wanted to offer to use this to change the aspect ratio not in post-processing, but when you're starting out with the subject," said Yoneda.
As for why it's a dial? "Actually, I wrote the nine types of format vertically," said Oishi. "And when we discussed how the user should choose between these formats... in a menu, it's quite tough. Even assigning it to a function dial or button or something like that... hmm. And then someone said, 'If we can implement it as a dial, is it easier?' And everybody said, 'Oh yeah, that's it!'"
Why there's no hybrid viewfinder on the GFX100RF
The GFX100RF uses an OLED EVF with 0.84x equiv. magnification.
Photo: Richard Butler
Several of Fujifilm's photo-focused cameras feature a hybrid viewfinder, which can act as both an optical viewfinder with an electronic overlay or as a purely electronic one. While it doesn't allow for true rangefinder focusing, it does provide a rangefinder-like experience... which is why we were initially confused that the company didn't include it on a camera whose name explicitly refers to a rangefinder design.
According to Yoneda, there are good reasons for it. "The hybrid viewfinder's structure is a little bit complicated, which means the magnification would be much smaller for such a high-resolution camera," he said. Those differences weren't just theoretical, either. "Of course, we created mockups with the hybrid viewfinder installed."
"Another reason is the digital teleconverter. If it comes with an OVF, we'd have to cover 20mm of range when using the teleconverter, which would make the guide-lines much smaller. So, from a practical point of view, we decided to install the EVF."
Will the GFX100RF get support for content credentials?
At its X Summit event announcing the camera, Fujifilm also mentioned that it had begun testing tools for dealing with content credentials, which can help authenticate a photo as being real versus AI-generated and can also provide a record of how a photo was edited. The company is part of the Content Authenticity Initiative and the Coalition for Content Provenance and Authenticity.
"We are still developing and investigating how to implement the CAI and the C2PA," said Oishi. "Unfortunately, we haven't decided on the final specification yet. But we believe this is a very important thing for photography."
"We have to, as an industry, come up with a standard"
As for whether the tech will come to existing cameras like the GFX100RF, Oishi says it depends on the details. "If we have to pay to implement it, or if users have to pay... not so many will want it. Then it'll only be for professional agencies or something," he said. "But if it is free, then we can manage the picture generation – what is real photography? And that is quite important."
"I think, of course, that will become more and more important, so we can't ignore it," said Igarashi. "So we have to, as an industry, come up with a standard. And be aligned, so we can at least define what AI is and photography is, and we can separate the images that we create."
To him, it's not necessarily about AI versus photography; it's about transparency. "We're not saying AI is not good or anything. It's just knowing what has been done through the process; I think that's important."
Interview conducted by Mitchell Clark at the Fujifilm X Summit in Prague, Czech Republic. Answers edited for flow.
When you use DPReview links to buy products, the site may earn a commission.
Sample gallery
This widget is not optimized for RSS feed readers. Please open this article's permalink in a browser to view this content.
Product photos: Mitchell Clark
The Nikon Z5II is a full-frame mirrorless camera built around a 24MP BSI CMOS sensor. It's an update to Nikon's entry-level full-frame Z5 and is essentially a version of the Zf that trades retro styling for a more conventional design.
Key Features
24MP BSI full-frame CMOS sensor
In-body image stabilization, rated up to 7.5EV
Autofocus subject detection with support for 9 subject types
11 fps Raw w/ mechanical shutter
30fps JPEG-only mode with pre-release capture
3.69M dot 60Hz EVF with 3000-nit peak brightness
4K/30 full-width, 60p w/ 1.5x crop
10-bit N-Log or N-Raw capture
Dual UHS-II card slots
Downloadable color mode presets via Imaging Cloud
The Z5II will be available in April and will retail for $1699 – a $300 increase over its predecessor in absolute terms, though a very similar price when considering inflation and its greater ambitions. Kits will also be available with a 24-50mm f/4-6.3 lens for $1999, or with a 24-200mm f/4-6.3 VR for $2499.
The Z5II's sensor is one we know well, as it features in cameras like the Zf and Z6 II. While it's certainly not state-of-the-art, it's historically performed excellently and offers noticeably faster readout speeds than the non-BSI sensor found in the original Z5, which hailed from the early 2010s.
That'll be most noticeable in video modes – its readout speeds are still slow enough that you likely won't want to use e-shutter mode unless you really need to shoot silently or are doing JPEG-only bursts where it drops to its faster, 12-bit readout mode. However, the Z5II supports much faster burst rates than its predecessor, shooting in Raw at up to 11fps with its mechanical shutter, where the original topped out at 4.5fps.
Hybrid abilities
The Z5II is a much more capable video camera than its predecessor, which could only manage shooting at 4K/30 with a substantial 1.7x crop. The new model, meanwhile, can shoot full-width 4K at up to 30fp and 120fps in 1080p for slow-motion shooting, double what the Z5 was capable of.
It also has a slate of advanced video features such as a product-priority focus mode, electronic stabilization, 10-bit N-Log, waveform monitors and even N-Raw. While the Z5II's target audience likely won't find much use for those later modes, it's hard to complain about their inclusion.
However, while its sensor has good readout speeds, it isn't anything near as fast as the one on the more expensive Z6III. That means you'll see more rolling shutter in full-width 4K, and will have to deal with a 1.5x crop if you want to shoot 60p, though the Z5II is at least capable of the higher framerate.
Latest-gen processor
The Z5II has Nikon's latest processor, the same one that powers cameras like the Z8 and Z6III. That means it largely has the same autofocus capabilities as those more expensive models. It supports the same subject recognition types – the Z5 only recognizes humans and animals, while the Z5II can also detect birds, cars, bicycles, motorcycles, trains and planes.
It also gains a 30fps JPEG-only mode, which supports pre-burst capture. The Z6III's faster sensor gives it a leg up in this area, though: it can shoot full-resolution JPEGs at up to 60fps and can hit 120fps by dropping down to an APS-C crop.
The company also claims the Z5II supports more advanced noise reduction, putting out cleaner JPEGs at high ISOs, and has added an AF-A mode, where the camera decides whether to use single or continuous autofocus.
A bright viewfinder and a more flexible screen
Nikon says the Z5II's viewfinder can reach a brightness of up to 3000 nits, which should help when shooting in harsh daylight. The company doesn't quote brightness figures for the Z5's EVF, though it otherwise has similar specs – both cameras use a 3.69M dot display running at 60Hz.
There are also some changes to the Z5II's LCD. At 3.2", it's the same size as the Z5's, but it's higher resolution and fully articulated, while the original's screen was limited to tilt adjustments.
How it compares
While the Z5II isn't as cheap as its predecessor, it is still among the least expensive full-frame ILCs ever released. Some other cameras on that list, like the original Z5 and Canon's EOS R8, are among its competitors.
At $2000, Panasonic's S5II has a substantially higher MSRP than those cameras and, before the Z5II, offered a more complete package than any full-frame camera in the sub-$2000 range. The S9, which is based around the same sensor, is closer in price to the Z5II but is aimed at a more video-focused audience, as it lacks both an EVF and a mechanical shutter. Given that, it didn't feel as appropriate for this list. While the S5II frequently goes on sale, street prices for cameras drop relative to their MSRPs – a camera that starts off at $1700 is likely to end up significantly cheaper than one that started life at $2000.
The one exception to that rule is if a camera sticks around long enough to get a permanent price cut to reposition it when its replacement arrives. That's essentially what's happened with Sony's a7 III, which was originally released in 2018. It shows its age in many ways but is still in a similar class to the other cameras in this comparison.
With the upgrades it gains over its predecessor, the Z5II has become one of the most complete full-frame options for under $2000. You're not giving up IBIS, battery life and an autofocus joystick like you would be with the EOS R8, and you're not giving up an EVF and dual top-plate control dials like with the Panasonic S9. It's relatively evenly matched with the S5II, though we've generally found Nikon's autofocus performance to be more reliable.
The a7 III may still seem like a worthy competitor on paper, especially considering that Nikon and Canon can't match E-mount's wide range of lenses. However, other brands have caught up to its once class-leading autofocus system, and its menus were dated and annoying to use even back in 2018. The once enthusiast-focused Sony is really showing its age.
Body and Handling
The Z5II's design is relatively unchanged from its predecessor, though that isn't a complaint. It has a standard mode dial with three custom slots, as well as two top-plate dials for controlling your exposure settings. The camera also comes with a wide variety of buttons, including two customizable ones on the front near the lens mount.
Nikon has added its Picture Control button, which debuted with the Z50II and lets you easily control your JPEG color mode. While the Z5II comes with Nikon's classic range of color modes built-in, you can also download more via the company's Nikon Imaging Cloud service and create or customize your own using the company's desktop software.
Out of camera JPEG, shot using the 'Deeptone Monochrome' color mode.
Nikkor Z 50mm F1.8 S | F5.6 | 1/2000 sec | ISO 100 Photo: Mitchell Clark
This setup provides a fair amount of flexibility and control over the look of your out-of-camera JPEGs, though it doesn't come with the freedom and enormous back-catalog of the industry-standard LUTs that companies like Panasonic let you use.
Handling
The Z5II is a solid camera with a deep grip, which fits well in the hand. It's sturdy – Nikon says the front, back and top covers are made from magnesium alloy – and sealed against moisture and dust. We shot our sample gallery in light to medium rain with no issues.
The control layout is the same one that Nikon has used across much of its Z lineup – anyone familiar with the original Z5 or Z6 series will be instantly familiar with it. Most of the buttons on the back are generally easy to access while shooting, as is the autofocus joystick. The Z5II also supports using portions of its touchscreen to control the autofocus point. The one button that can be difficult to reach in general use is the Picture Control button, as its position on the top plate will likely require you to re-adjust your grip to hit it.
Viewfinder
The Z5II's viewfinder is high-resolution and has a relatively high magnification, but where it really sets itself apart from the crowd is in brightness. It has a peak brightness of 3000 nits, which means it should still be clearly visible, even on a bright, sunny day.
The panel runs at 60Hz. While that's not as fast as the 120Hz mode found on Nikon's higher-end cameras, it should be responsive enough for all but the most fast-paced situations.
Screen
The Z5II features a large, high-resolution, fully-articulated display. While it doesn't provide stills shooters with the ability to tilt up or down in a single motion, once you flip it out, you can use it at pretty much any angle. It also lets you monitor video you're taking of yourself, an essential feature for anyone looking to try their hand at vlogging.
Ports and slots
Again, the Z5II's port selection remains largely unchanged from its predecessor's. It retains the dual UHS-II SD card slots, headphone and microphone jacks, USB-C socket and micro HDMI port. Overall, it's hard to find fault with this selection.
Battery
The Z5II uses the same 16Wh EN-EL15c battery as many of Nikon's other full-frame cameras. It's CIPA-rated to get around 330 shots on a single charge. While you can generally expect to get a fair bit more than the literal number of rated shots, the rating provides a consistent benchmark we can use to measure cameras against each other.
We'd consider a rating around 300 to be acceptable for a day of shooting or a weekend where you're occasionally taking photos, but anything more, and you'll probably want to keep an extra battery or USB-C battery bank at hand.
If you routinely have marathon shooting sessions, the Z5II can be fitted with the sold-separately MB-N14 battery grip, the same that's used for cameras like the Z6 II and Z6III. It should roughly double your battery life and lets you hot-swap in a fresh battery without cutting power to your camera.
Initial Impressions
The Z5II seems like an extremely calculated move in that it fits precisely into Nikon's lineup and the full-frame camera market as a whole. It's a budget-ish model that gives you one or two good reasons to pay a bit more for it than its competitors while not being so good as to dissuade those with deeper pockets from buying a more expensive model like the Z6III.
It's one of the most remarkably complete full-frame cameras that you can get for under $2000, and that makes it easily fit into a flowchart. Care about video and shooting fast-moving subjects? That rules out the Z5. Want IBIS? The EOS R8's out. Want a viewfinder, mechanical shutter and modern menus? Well, that leaves the Z5II. But what if you just have to have full-width 4K/60p, faster burst rates and an even better viewfinder? Well, Nikon will be more than happy to sell you a Z6III for $700 more.
Of course, there are more options if you're willing to consider other sensor sizes. Fujifilm's APS-C X-T5 is a similar class of camera, and the lenses for it are generally going to be less expensive if budget is a big concern for you. Nikon sells the APS-C Z50II, which has surprisingly similar capabilities, is smaller and is almost $800 cheaper. For those set on full-frame, though, the Z5II remains a very well-rounded entry point.
The Z5II is a much more ambitious camera than its predecessor
It's easy to overstate the importance of the price bump from the Z5 to the Z5II. The original was the second cheapest full-frame mirrorless camera ever released, and its successor is coming out after several years of high inflation at a time when the economy doesn't seem to be doing so well. It's also a much more ambitious camera; it's extremely similar to the Z6 II, which launched for $2000 in 2020, except it comes with a better viewfinder and vastly improved autofocus. Sure, people will wish all that was available for the same price the Z5 launched at (or less), but the reality is that even with its higher MSRP, the Z5II is still one of the least expensive full-frame mirrorless cameras at launch.
The one final wrinkle is the Nikon Zf, a camera that is, by all important metrics, the same as the Z5II but with a higher price tag. It comes with a style that the rest of the cameras we've talked about today can't match; it looks like a classic film SLR with all the dedicated dials, but it can also be used like a modern twin-dial mirrorless camera.
Some people won't care about or for that design, and that's great – they can get the Z5II and never think about the Zf again. Others will care about that and pay extra to get it – or wish they could and feel slightly bad about it. Either way, it's the one competitor that requires an emotional decision, not a logical one.
Please do not reproduce any of these images on a website or any newsletter/magazine without prior permission (see our copyright page). We make the originals available for private users to download to their own machines for personal examination or printing (in conjunction with this review); we do so in good faith, so please don't abuse it.
Sample gallery
This widget is not optimized for RSS feed readers. Click here to open it in a new browser window / tab.
I am not an expert in economics, and I am not interested in a political discussion here, so I simply asked AI, "How will the new Trump tariffs impact the camera and lens imports to the US?". Here is the AI answer:
The new Trump tariffs, as of April 2, 2025, will likely have a notable impact on camera and lens imports to the U.S., particularly from key manufacturing hubs like Japan and China. Here’s a breakdown of the effects:
Higher Import Costs: The tariffs include a 24% increase on camera products from Japan and a 34% rate on goods from China, plus a 10% baseline tariff on imports from all trading partners. This directly raises the cost of bringing in cameras, lenses, and components from major players like Canon, Nikon, Sony (Japan), and third-party lens makers in China. For example, a lens or camera body that cost $500 to import could now face an additional $120-$170 in tariffs, depending on its origin.
Rising Consumer Prices: Historical data from Trump’s earlier tariffs (e.g., 2018-2019) shows that U.S. consumers typically absorb most of these costs. Importers and retailers are likely to pass on the tariff burden, potentially increasing the price of a $1,000 camera to $1,200-$1,340, factoring in the tariff, shipping, and taxes. This aligns with projections from groups like the Consumer Technology Association, which warned of significant price hikes in tech-related imports.
Supply Chain Shifts: Manufacturers may try to offset costs by relocating production. Many Japanese firms already moved some factories to Southeast Asia (e.g., Thailand) during Trump’s first term to dodge China-specific tariffs. However, if critical components still come from China, the 34% tariff applies, limiting the relief. Building U.S.-based production isn’t a quick fix—optics manufacturing requires specialized skills and infrastructure the U.S. currently lacks.
Inventory and Market Reactions: Uncertainty around tariff exemptions (e.g., temporary relief for Canada/Mexico auto imports) could prompt importers to stockpile goods pre-tariff, a trend seen in late 2024 with consumer hoarding. This might delay price spikes, but once stockpiles run dry, costs will climb. Demand could also soften if U.S. prices outpace those in untariffed markets like Europe.
No Quick Domestic Boost: Trump’s tariffs aim to spur U.S. manufacturing, but the camera industry has little domestic presence. Unlike steel or cars, camera production can’t easily shift stateside due to missing expertise and supply chains, meaning imports remain the lifeline—and the target of cost increases.
In short, expect pricier cameras and lenses in 2025, with limited immediate relief from domestic production. Manufacturers might eat some costs to stay competitive, but the bulk will likely hit U.S. buyers, echoing patterns from past tariff rounds where consumer prices rose without significant job gains in affected sectors. Retaliatory moves from Japan or China could further complicate the picture, but for now, it’s a cost-driven story.
Yesterday, Viltrox had some fun with April Fool's Day and announced a lens in its Air lineup that was, well, literally air. But today, the company has revealed a real addition to the Air series of compact and lightweight lenses. The AF 50mm F2.0 Air was initially announced and displayed at CP+, though details were extremely slim at that point. Now, though, things are more official, with full details available.
The AF 50mm F2.0 Air is available for Z-mount and E-mount. It joins the 20mm F2.8 and 40mm F2.5 full-frame lenses already in the lineup, along with 25mm F1.7, 35mm F1.7 and 56mm F1.7 APS-C Air lenses. The 50mm focal length, affectionately called the nifty fifty in the photography world, is a versatile option. It's ideal for everything from street photography and travel to portraits and more.
Image: Viltrox
Viltrox's take on this classic focal length is compact and lightweight, with the E-mount model weighing 205g (7.2oz) and the Z-mount version weighing slightly more at 220g (7.8oz). The optical design features thirteen elements in nine groups, which include three ED lenses, four high-refractive elements, and one aspherical element with HD nano-coating. Viltrox says it will provide "vivid, distortion-free images."
The lens offers an aperture range of F2.0 to F16 and it features a nine-blade aperture, resulting in what Viltrox says is "stunning bokeh." An STM motor drives autofocus, which works with eye and face detection, promises minimal focus breathing and supports in-body image stabilization. It can focus as close as 0.51m (20").
The Viltrox AF 50mm F2.0 Air is available today. It's currently on sale for $183, though it will cost $199 at full price.
Viltrox has just released the previously reported 50mm f/2 full-frame autofocus AIR lens for E and Z-mount. Pre-orders are now open (reg. price is at $199, intro price is $183 only at Amazon and Viltrox):
When you use DPReview links to buy products, the site may earn a commission.
Photo: Richard Butler
Some years ago, when I was relatively new to the camera industry, I wrote a post for DPReview's short-lived blog, suggesting it was high time someone re-thought the way camera interfaces work.
I used Apple as an example of a company making inroads into an established market by developing a completely different way to interact with a device. I had no idea, back then, just how much impact the iPhone would go on to have, of course. The iPhone 3G, the first to offer competitive communication speeds, had only been launched a few months earlier and it seemed impossible that the likes of Nokia would be swept away by a relatively small computer company.
I explicitly wasn't advocating for cameras to move to a smartphone-style touch interface, more for a blank-sheet reconsideration of what a camera needs to provide and how best to prioritize those things.
When I wrote a blog post in 2008 asking for an Apple-style re-think of the way cameras operate, I had no idea just how significant the iPhone would go on to become.
Rendering: Apple
Sixteen years later, no one's really attempted it. A lot of cameras still operate like film cameras with a dizzying array of digital functions clumsily added on top. Most manufacturers haven't significantly re-thought menu systems originally designed for 20-or-so options despite them now having to accommodate around 100. Arguably none of them work well at this point: the difference is in just how badly they cope.
The result is cameras that are only really usable by people who've spent quite a lot of time learning how to use them, which is why I quietly seethe every time I hear a camera being described as 'intuitive.' Photography's core elements are complex enough that there'll always be something of a learning curve, but there's probably a middle-ground between a smartphone that does everything from focus and exposure to adaptive processing for you and a camera that operates like a 1980s SLR with a text-based choose-you-own-adventure computer game glued to the back.
Small steps
There has been some innovation since then, of course: Pentax created the TAv (time and aperture priority) exposure mode that has now become commonplace in the form of allowing Auto ISO while in Manual exposure mode. And its Hyper Program mode where you could override its aperture or shutter speed decisions while retaining a high degree of automation.
Likewise, Canon introduced its Flexible Priority exposure mode (along with the disappointingly useless M-Fn swipe bar) on the EOS R, which let you select which of aperture value, shutter speed and ISO you controlled and which were automated, on-the-fly. I'll confess I never quite managed to get my head 'round using it quickly enough for it to be beneficial.
The Sigma BF is not the answer
With its dedicated settings screen, the Sigma BF represents a radical new approach to camera operation.
Photo: Richard Butler
The Sigma BF is one of the most radical attempts I've witnessed to re-think how a camera operates. That's why I've put so much time into making videos about it over the past few weeks: because it's so different to anything you might have used before that it's hard to appreciate without seeing it in action.
To be absolutely clear: it is not the future of photography. It's a fascinating, back-to-fundamentals way of controlling a camera that makes you really think about shutter speed, aperture and exposure compensation (and by extension, ISO), in a way I've found quite inspiring. However, it engenders (perhaps even enforces) a slow, contemplative way of shooting that wouldn't be appropriate for most photography or most photographers.
I'll admit when I first heard the underlying specs of the BF I was worried Sigma had somehow taken five years to make a more limited version of the fp, which would appear to be a complete waste of everyone's time. But when I got to actually use it, the interface turned out to make it one of the most interesting cameras I've used in years. Again, not as an all-round, do-anything camera: even if you added a mechanical shutter, it wouldn't be that. But as an attractive device for documenting the world, it's strangely compelling.
All about the detail
Whatever you might think about the BF, a little bit of time spent using it reveals just how much thought has gone into its interface. Learning to operate each function one at a time through the dedicated settings display, then using the main LCD solely for composition and focus, with no incomprehensible icons distracting you, is unexpectedly engaging.
Whereas on the single-dial Panasonic S9 I find myself constantly frustrated, pressing buttons, cursing and wishing for a second control dial, on the BF I've found myself intentionally passing the aperture control back to the camera's single dial. It's difficult to rationalize, and yet, it makes sense when the camera is in your hand.
There are two details that have jumped out at me. The first is that: when you half-press the shutter, just as you're about to take your shot, the BF switches the dial's function to exposure compensation. It's a lovely little touch: it assumes you've selected the aperture and/or shutter speed you want, creatively, but makes it easy to give it a little tweak at the last moment, if needed.
It just works
But the detail that really stood out to me is the way White Balance is handled. Not something you might usually notice or pay attention to, but the way it's handled on the BF is so clever that it makes you realize how much thought has gone into it.
When you first turn the camera on, the White Balance icons are arranged in order of color temperature, so that you can scroll from correcting too much orange light to correcting too much blue. That's standard enough.
Custom White Balance presets get saved along the white balance continuum in the menus. You can tap the trash icon to delete them.
But what jumped out at me is what happens when you set a custom white balance. For this you have to bring up the 10-setting function menu to access the Custom WB option, but whatever value it records is then saved as a preset, in sequence along the color temperature spectrum.
So if you set a custom white balance that isn't quite as cooling as the Incandescent preset, that custom preset will now appear between the Incandescent and Fluorescent settings as you scroll through your white balance options. If you find you no longer need that preset, you can delete it.
Becuase the custom presets appear in sequence, they can be easily selected from the dedicated settings screen at the top corner of the camera. The two presets displayed in Kelvin are custom settings I've created.
Animation: Richard Butler
Manually defined white balance values are treated a little differently: they still appear in their relative position on the scale, but have to be selected from the function menu because, once selected, the rear dial adjusts their value, rather than jumping between presets. I was annoyed by this inconsistency at first, but it makes sense that you're more likely to want to constantly fine-tune a white balance value you've chosen yourself, rather than setting from a grey card.
Ultimately, the handling of white balance is a tiny little detail for a setting most people don't regularly interact with, but a detail that's redolent of the degree of consideration that's gone into ensuring the BF can be operated using a screen that displays a single parameter at a time.
There's still need for revolution
As I hope I've made clear, I'm not saying the Sigma BF is the iPhone of the camera industry: far from it. But sixteen or so years after asking for it, it's lovely to see someone willing to radically rethink how a camera could work. And I want to acknowledge Sigma and whoever designed the BF's White Balance system for doing so.
The National Association of Broadcasters (NAB) is still a few days away, but Adobe has announced updates coming for video users in anticipation of the annual trade show. Most of the changes are focused on Adobe Premiere Pro. The latest features, all of which have already been available in beta, aim to streamline the editing process even more with the help of various AI-based tools. Frame.io is also getting a few updates, making collaborating and controlling your files easier.
Adobe Premiere Pro updates
Image: Adobe
One of the more exciting beta tools that is getting general availability is Generative Extend. Powered by Adobe Firefly, Generative Extend uses AI to create a few extra frames when clips are just a bit too short. Firefly essentially uses the audio and video from your clip as a prompt and adds a few frames. It's ideal for holding on to a character reaction for an extra beat, extending sound effects or cutting an awkward gesture or facial expression right at the end of a clip.
DPReview's Mitchell Clark tested Generative Extend when it was announced at Adobe Max last year and was quite impressed. At the time, there were quite a few limitations, but luckily, Adobe addressed those. Now that it's moving out of beta, it works with up to 4K video and also works on vertical videos. It also works in the background, so you can keep editing while it processes.
Adobe says Generative Extend is safe for commercial use and that appropriate Content Credentials are embedded in the file. Adobe has also said that your content remains your own and is not used to train these AI models. The tool is free to use for now, though, after a "limited time" (Adobe didn't provide any more detail), Generative Extend will require Firefly generative credits. Pricing will vary based on the format, frame rate and resolution of your video.
Media Intelligence, an AI-powered search tool, is also coming out of beta. A search panel in the upper right-hand corner of Premiere Pro allows users to search for everything in one spot, with the AI recognizing the content of your clips, including objects, locations, camera angles and more. Adobe released the beta version of Media Intelligence and the AI-powered search panel in January, but now there will be full access to the feature.
Image: Adobe
Media Intelligence allows you to search using natural language, and it will find any matching visuals, spoken words or even embedded metadata. The AI recognition happens locally, so no internet is required. It promises to significantly speed up the editing workflow for those who need to pull from large libraries or are working on big projects.
Image: Adobe
Caption Translation, yet another January beta release, is also coming out of beta. This tool allows for AI-powered multilingual caption generation, saving users quite a bit of time when translating captions. It currently supports 27 languages and can be accessed in the Text Panel. You can even display multiple visible caption tracks simultaneously for greater flexibility.
Finally, a non-AI-based tool is also on the list of beta features going mainstream. Adobe's new Color Management feature allows users to transform Log and Raw from nearly any camera to SDR and HDR without LUTs. Adobe says it is a simple and approachable feature with six presets that any video editor can use, no matter their experience level. It also says it will be easier to match videos from different cameras and to define the look and feel of your videos.
All of the new Premiere Pro features are generally available today.
Adobe Frame.io updates
Frame.io is Adobe's take on collaborative media management. Last fall, Adobe added Lightroom integration for the platform, making it more usable for those who need access to more than just video work. Now, the company has added more tools for collaboration. Many of the tools are only available (or applicable) to larger teams, but there are some useful features even for smaller collaborations.
An example of the watermarking tool in Frame.io
Image: Adobe
Admins now have the option to create brand templates that any user can apply, making it easier for teams to create consistent content with a branded visual identity. It's also possible to protect work-in-progress content with custom watermarks, though you'll need a Pro, Team or Enterprise account to use those.
While you may want to share your files with collaborators, you don't necessarily need everyone to have editing or even commenting access. Adobe has added restricted folders, which allow you to keep things organized while protecting sensitive assets and discussions. These folders will allow you to set customizable permissions, changing who has access to view, comment or edit.
The Frame.io features are generally available today.
Working with lights can be challenging for many reasons, but partly because of the manual adjustments necessary as you dial in your setup or when changing your lighting. Accessory maker Falcam, a sub-brand of Ulanzi, aims to take some of that work out of the equation with its latest release, the Move LightGo.
The Move LightGo essentially adds a motorized head to your light stand, giving you remote access to angle adjustments. The device mounts to the light stand and attaches to the front of the light via Bowens mount. Unfortunately, lights with other mounts aren't compatible with the Move LightGo.
Image: Falcam
Once attached, you can control the Move LightGo with a wired remote (included), a wireless remote with up to 30m (98.4') of range (for purchase separately), or an app with up to 10m (32.8') of range. It supports dual-axis movement with 170 degrees of tilt and 450 degrees of panning. Having the option to rotate and tilt the light without having to physically be near it could save a lot of time. Perhaps even more helpful, though, is the option for remote adjustment when the light stand is extended and out of arm's reach.
Falcam explains that the Move LightGo even adds tilt capabilities. Most light setups can't adjust a full 170 degrees with certain lighting modifiers attached because the stand gets in the way. However, since the Move LightGo extends the light away from the stand, it allows for extra tilt when working with larger modifiers.
The MoveLight Go Wireless Remote.
Image: Falcam
The Move LightGo allows users to assign unique numbers to each unit, so if they have multiple, they can control each one individually. You can also save and recall preset light positions for even faster adjustments. It also features screw holes and Arri location holes for adding additional accessories.
The device requires power, but it is compatible with multiple power solutions. That includes AC power input with USB-C connection (a standard power cable is included), power-sharing modules or a V-mount battery or power bank. Falcam sells two power adapter modules – the Move LightGo Cannon 600 and DC 200 – both of which are available for purchase separately for $15. It can hold up to 6kg (13.2lbs) and weighs 1.68kg (3.7lbs).
The Move LightGo is available for purchase starting today for $249. It includes a wired controller, but from April 2nd to April 13th, Falcam is including a free wireless remote control with every Move LightGo order.
Connexion
