Samsung has announced three new folding phones, updating its existing models and adding a new one to its lineup, complete with a new form factor.

The flagship model is getting a rebrand. Formerly known as the Galaxy Z Fold series, this year’s entry is called the Galaxy Z Fold 8 Ultra. Like its predecessor, it has a 6.5″ display on the outside, and an 8″ one on the inside. As you’d expect from an “Ultra” phone, it has a triple-camera setup. The main “wide” and telephoto cameras are unchanged from the ones found on the Galaxy Z Fold 7, but the ultrawide has been upgraded from a 12MP Type 1/2.5 (25mm²) sensor with an F2.2 lens, to a 50MP one with an F1.9 lens, which Samsung says will let in 33% more light.

Samsung

The company says it has enhanced its HDR mode for the main camera, as well as its low-light “Nightography” mode. The phone’s 8K video also now records in the APV codec, which Samsung says “gives users greater flexibility and quality for editing and production workflows.”

Aside from the upgraded ultrawide camera, Samsung has included the new Snapdragon 8 Elite Gen 5 processor with 12 or 16GB of memory (dependent on what storage size you get), along with a higher-capacity 5000 mAh battery, up 600 mAh from the one in the Z Fold 7. The company has also re-engineered the phone’s internal screen to make the crease less visible, while making it brighter and nicer-feeling to open. And despite all this, it weighs the same 215g (7.6oz) as its predecessor, and each half is a hair thinner at 4.1mm.

None of these improvements come cheap, though. Last year’s Z Fold 7 was $100 more than its predecessor, and Samsung has bumped the price again, with the Z Fold 8 Ultra starting at $2100 for the 256GB model.

Samsung

There is, however, now a new option below it: the Z Fold 8, which takes on a slightly different form factor. While the Ultra has a relatively tall and narrow 3:7 outer screen and a nearly-square 1.11:1 inner screen, the new model’s cover is a wider, shorter 10:16, and the inner display is 4:3. The Z Fold 8’s outer display has a 5.5″ diagonal, while the inner one is 7.6″.

While the Z Fold 7 (which was, remember, moreso the predecessor to the phone now called “Ultra”) marked a turning point as a folding phone that didn’t come with big compromises to its camera system compared to its candybar counterpart, that trend hasn’t continued with the Z Fold 8. It drops the telephone camera entirely, and its main 23mm equiv. camera is smaller, slower and lower resolution than the one on the Ultra. The ultrawide, however, is the same 50MP model.

Not everything is a downgrade compared to the Ultra, though. The displays may be a different size, but are still just as bright, and the Z Fold 8 has the same processor and storage options. And while it’s thicker both folded and unfolded, it’s also a touch lighter. Even if you don’t prefer the more passport-style form factor, though, the price may be slightly more attractive than the Ultra’s, as the phone starts at “just” $1900.

Samsung

Finally, Samsung has also updated its Z Flip 8, the smaller model that unfolds to be a similar size to a more traditional smartphone. The company doesn’t seem to have made any changes to its cameras – it still has a wide 50MP Type 1/1.57 (50mm²) and ultra-wide 12MP Type 1/3.2 (15mm²) – but it’s lighter and thinner than its predecessor. The company has also updated the processor to that same Snapdragon model (though there’s no option for one with 16GB of RAM like with the larger models), and has made improvements to the front screen’s interface, making it easier to use if you want to avoid opening your phone and potentially getting sucked in by feeds and apps.

The Z Flip 8 retains its position as Samsung’s least expensive foldable, but its $1200 price tag represents a $100 increase over its predecessor’s.

The Z Fold 8 Ultra, Z Fold 8, and Z Flip 8 are all available to pre-order today, and are set to become available on August 7th.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

The DPReview forums have nearly 100 customized sections to discuss all your gear and photography interests. From reading official DPReview news to talking about camera brands and Nature and Wildlife Photography, there’s a space for everyone’s curiosity.

For visitors who are interested in buying or selling their gear, we also have the For Sale and Wanted forum section. And if you are a mobile phone camera user and love to share your on-the-go photos, not to worry, we have Mobile Photography Talk forum as well.

So, with that said…

Which forum sections are your favorite to visit for both camera brands and digital photography, and why?

I would also like to take this opportunity to ask you which forum sections you would like added that we don’t currently have?

Drop a reply in the comments section below, and if you’ve got a photo to include from your mentioned forum sections, it may be selected for next week’s showcase article on this topic!

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

The Sony FX5 is a compact cinema camera capable of up to 4.5K120 and Raw video capture, aimed at independent videographers and small productions. It builds on the legacy of the FX3, adding a host of features we’ve not previously seen from Sony.

Key features

• 16.6MP Full-Frame stacked CMOS sensor
• 4K/60 from 5K capture
• 4K/120 from 4.5K crop
• 4K/240 capability via firmware due in late 2027
• Open gate shooting
• Combined dual gain mode for increased DR
• Three “base” ISO steps
• Internal Raw capture
• Subject recognition autofocuse
• 32-bit float audio compatibility
• Large 16:9 rear LCD
• Waveform display
• Optional EVF

The FX5 will be available, body-only, for $4899, or $5499 with the XLR top-handle, which allows 32-bit float audio capture. Other optional accessories include a removable, tiltable viewfinder and a USB-C-to-BNC timecode cable. It will be available from August.

What’s new

The FX5 is a surprisingly significant upgrade compared to the FX3, suggesting Sony is still working out what this type of camera needs to offer, and iterating. It nominally sits above the FX3 but looks like it’s trying to do what the FX3 did, plus a lot more, making it most directly comparable to the likes of Canon’s C50 cinema camera.

The most visible addition is its ability to capture Raw footage, but that’s just the most dramatic departure from the existing camera. There are also a host of features and UI changes that have come down directly from the company’s pro cinema products, to the degree that it represents not just a major upgrade but will also present an appreciable learning curve for existing FX3 users.

Don’t call it Raw

Interestingly, Sony doesn’t refer to the camera’s Raw mode in those terms, instead settling on the snappy X-OCN, which I’m sure we can agree is clearer. They tell us it’s a 16-bit linear Raw format, which is a lot more detail than we’re typically given about the other Raw video codecs. Linear encoding is a rather inefficient way of doing things but, in theory at least, gives the maximum flexibility in terms of highlight editing and reconstruction.

This “EXtended tonal range Orginal Camera Negative” gives you more flexibility in terms of correcting white balance, applying noise reduction, highlight and tonal adjustment and color grading. It’s a version of the format already used by the Burano and Venice cameras, so should be compatible with DaVinci Resolve, Adobe Premiere Pro, Avid Media Composer and Baselight software.

The FX5 uses the X-OCN LT (Light) version of the codec, used on the Burano cinema camera (and that’s even an option on the company’s flagship Venice 2 model).

New sensor

James Tirado

The FX5 is based around a new stacked CMOS sensor. Sony quotes the pixel count as 16.6MP which, given the FX3 turned out to have a 48MP behind a 12MP color filter array, should make us wonder how similar it is to the 66.8MP sensor in the recent a7R VI.

Sony wouldn’t be specific about any differences, but the significantly higher output speeds make us assume that there’s DRAM or more complex readout circuitry built into the back of the sensor. We know that the a7R VI’s 4K video comes from combining quartets of pixels, so placing that same pixel architecture behind oversized color filters that extend across sets of four pixels would make a lot of sense. Even if you’re not that interested in video, this ability to produce variations of a sensor with different capabilities might still offer an interesting insight into the products we’ll see in the coming years.

In practice, the FX5 is faster at reading out a comparable region of its sensor (around 5.5ms in full-width, 16:9 5K modes, around 24% quicker than the 7.2ms that the a7R VI takes in its ‘5K sampled’ 16:9 modes). Open gate mode read out the full height of the sensor in 8.3ms (1/120 sec).

Sony says the camera has a “Dual Gain” mode that boosts dynamic range by combining the low gain and high-gain signals being read off the sensor. It is available in the camera’s lowest native gain mode (ISO 800) and the modes derived from it (ie up to EI 3200). It can be used at up to 60p in most resolutions or up to 30p in open gate mode.

We’re told it may operate differently from the combined dual gain mode the a7R IV offers in video, though. We were briefed that the image is analysed and the high gain (low noise) data is only utilized in the shadow regions of the image, making the process faster than combining both gain settings for all pixels. Engaging the Dual Gain mode (via the ISO menu) increases the readout time by a factor of 2.1x, which is very similar to the proportion of increase we measured on the a7R VI.

Three “base” ISO settings

Interestingly, Sony also says the FX5 has three “base ISO” settings: 800, 4000, 12,800. To make sense of this, it’s worth noting that there isn’t a fixed or universally shared definition of what ‘base ISO’ means. What it doesn’t directly refer to is conversion gain steps at the sensor level. So, for instance, the FX3 and a7S III had dual conversion gain sensors, but Sony says it does not consider them to be cameras with dual base ISO.*

James Tirado

Instead, Sony tells us its definition of base ISO relates to modes that offer the same dynamic range distribution between highlights and shadows, and have a near-identical noise floor, allowing footage to be intercut between the modes. This makes most sense when working in the camera’s Cinema EI mode, where the camera is locked to one of these “base” states and then delivers ISO settings up to two stops higher or lower by essentially under- or over-exposing the ‘base’ state, then including a metadata tag saying how light or dark the footage is meant to be rendered. This really comes into its own in a Raw workflow, as this is how it’s possible to adjust the “ISO” of footage, after the fact.

The decision of Sony to offer three “base ISO” states shouldn’t lead you to conclude that there are three distinct gain steps at the hardware level, nor should it be confused with the camera’s optional “Dual Gain” mode that combines the output of different hardware states.

*Just to make clear how slippery the concept is, the FX3’s firmware V2 added Cinema EI, including a setting called Base ISO, which has two settings. We are told the higher of these is officially considered a High Sensitivity mode, not a second base ISO.

New UI, wider range of features

Beyond these, the most radical change is to the user interface, with the FX5 gaining an all-in-one settings display borrowed almost directly from the Burano (and closely mimicking the displays that Panasonic borrowed from Arri, etc, etc). Its menus have also been re-worked to make them look more like Sony’s pro cinema models, which will add a bit of a learning curve for existing FX users but brings it closer into line with other production cameras.

The company says it will be adding a vertical version of the UI in firmware 2.0.

James Tirado

Also added are a host of tools that other brands have started offering but that have been absent from previous Sonys at this point in the market. So, in addition to options like the focus map, that highlights blocks of the image that are in and out of focus, the FX5 offers a false color display and waveforms for helping to judge exposure, and a vectorscope display for assessing color distribution. These come on top of tools such as zebras, focus peaking and a histogram, that were already available.

James Tirado

The camera is based around Sony’s latest Bionz XR2 processor, so gains all the subject recognition AF modes that we’ve become used to on the stills side of things, boosting autofocus dependability for run-and-gun shooting.

Body and handling

James Tirado

At first glance, the FX5 looks a lot like the FX3, but the changes reveal themselves, the closer you look. It’s a fraction larger, for a start, having grown a couple of mm in each direction but significantly the body of the camera itself is deeper, within those boundaries, so it feels bulkier. It’s also a fraction heavier, though Sony says it’s a less than 5% increase.

The layout of the camera’s six programmable buttons has been reworked and relabeled to better match what you’d find on the company’s higher-end cinema cameras. It also gains the multi-function dial from the Sony Burano, which can be used to navigate through menus, and make quick changes from the live view screen.

James Tirado

The FX5, like the recent Alpha cameras, gains a second USB-C socket. This can be used for a range of things, from tethering, powering the camera, data transfer or for accepting a timecode signal. As with other recent Sony cameras, the second USB-C socket is actually a USB 2.0 (480Mbps) socket, so can only be used for power and less data-intensive tasks.

The camera’s connectivity is further updated with an upgrade to Wi-Fi 6E, and the addition of an Ethernet port, which will likely find use in many houses of worship.

Display

Sony has upgraded the rear tilting/articulating display to a 3.5″ model with a video-friendly 16:9 aspect ratio. Sony says the latter change makes it a much bigger upgrade to the 3″ display on the FX3 than it appears at first glance, as that screen’s 4:3 aspect ratio meant you were looking at a video that was really only 2.5″. Now, it can fill the entire screen, provided you’re not using an open gate or DCI (“17:9”) recording mode.

James Tirado

The FX5 has two slots, each of which take either CFexpress Type A cards or the slower UHS-II SD cards. The two card types don’t connect to the same connectors: one socket it essentially sited within the other.

Battery

James Tirado

The FX5 becomes the second camera to adopt Sony’s new 20.9 Wh NP-SA100 battery, following the a7R VI. This not only provides higher voltage and capacity than the NP-FZ100 batteries the FX3 used, but should allow for slightly longer record times. Sony says it can shoot for 130 minutes at 4K/60, while the FX3 caped out at 113. Of course, this change means that those with a large collection of batteries will need to spend quite a bit to rebuild it (provided they were running off an internal unit, rather than powering their cameras via an external V or Gold mount battery).

Despite the increased battery capacity, and smaller tweaks to the body like the addition of a second 1/4-20″ socket on the bottom plate to reduce the risk of rotating, Sony says the new camera is close to the FX3’s weight, coming in at 734g (25.9oz), versus 715g (25.2oz)

Accessories

While the camera doesn’t have an integrated EVF – likely a concession to keeping its body as protrusion-free, and therefore gimbal-friendly as possible – Sony is making a removable one as an optional accessory. It features a 3.68M-dot panel that can reach up to 2500 nits peak brightness, and supports a wide color gamut to provide a more accurate preview. It’ll plug into a new port right above the multi-interface shoe, meaning you can’t have it attached if you’re also using the shoe. However, Sony says it’s working with a third-party to create an extension cable for it that will let you place it in more ergonomic position. The EVF, named the DVF-EL1, costs $698.

Another accessory is the XLR handle which, like the ones released for Sony Alpha-series cameras, will enable both the use of professional microphones as well as 32-bit float audio recording. The latter feature will an exciting addition for documentary and event shooters, as its different method for storing data essentially eliminates the risk of clipping, no matter what your gain levels are set to (though your microphone can still be overwhelmed). The handle can be purchased in a bundle with the FX5, or separately for $798

Video modes

Like most of Sony’s previous cameras, the FX5 delivers all its compressed footage in output-ready 4K resolutions: with in the 16:9 UHD or ~17:9 DCI formats. However, in a detail borrowed from cameras like the Venice and Burano they are named in terms of the pixel region used to capture them. So, although the camera has “Imager Mode” options called 5K 16:9, the output is still the standard 3840 x 2160 UHD footage.

James Tirado

The Raw footage, by contrast, arrives in your editor in the resolution in which it was captured. So 5K means 5K.

One of these Raw modes is a 3:2 open gate mode, capturing the full area of the sensor to make it easier to output both landscape and vertical cuts from the same clip (if you can find a composition that’s sensible for both, that is). The camera can also apply a real-time desqueeze correction for anyone using anamorphic lenses, with 1.3x, 1.5x, 1.6x, 1.8x and 2.0x squeeze factors being supported.

Raw recording

When recording to its internal Raw X-OCN codec, the FX5 can shoot at roughly 5K in 3:2, ∼17:9 and 16:9, at up to 60p. There are three levels of compression for the codec, with the standard being “LT,” and C1 and C2 recording at increasingly lower bitrates to reduce file sizes. Sony says C1 will be around 25% smaller than LT.

The company says it plans to release a firmware update sometime in 2027 that will allow for recording 4K/240 footage in Raw, though it hasn’t provided any details on whether the mode will have a crop.

The camera needs to reboot in order to switch into or out of Raw mode. As we’ve seen on other cameras, it also needs to reboot to switch between 24p, PAL and NTSC modes, as the system clock needs to reset to work in multiples of 24, 25 and 29.97 frames per second. Because there’s no separation of Raw/Compressed or 24p/PAL/NTSC, it’s very easy to accidentally prompt the camera to reboot if you select the wrong shooting mode.

Likewise, the camera will only playback footage if it’s in the right system clock mode, and will only show you the Raw clips if you’re in Raw mode and only your compressed clips when in compressed mode.

Compressed footage modes

The FX5 names its video modes by the areas that are sampled, rather than their output resolution. The camera’s “17:9” modes (5K and 4.5K) are output as DCI 4K (4096 x 2160), while the 16:9 modes (5K, 4.5K and 3.2K) are output as 3840 x 2160 UHD.

The DCI modes can only be shot in XAVC S-I (All-I H.264), whereas moving to 16:9 adds the option to shoot XAVC H (H.265) or XAVC S (H.264) with a choice of 4:2:2 or 4:2:0 chroma sub-sampling.

Sony says the FX5 will gain support for shooting 3:2 open gate in XAVC S-I will come as part of firmware 2.0, due in around October 2027.

Super35

The FX5 also provides an option of cropping in to an APS-C-sized region of the sensor, providing compatibility with lenses designed for Super35 cameras. While the FX3’s APS-C mode was sampled from an 1080p region of the sensor, the FX5’s higher-resolution sensor means it can capture a 3.2K (3264 x 1836) region in 16:9. However, this is still output as 1080p when shooting in compressed modes.

Support tools

The FX5 gains a whole host of video-specific tools meant to make it easier to get proper exposure and focus. It has a waveform monitor for clearer and more accurate exposure monitoring, a false color overlay that makes it easy to see at a glance whether your subject is properly exposed and whether any of your highlights and shadows are clipping, a vector scope for more information about your colors and a focus map overlay to assist with focus.

The company has also added more options for desqueezing the preview when shooting with anamorphic lenses, providing several options between a 1.3 and 2.0x ratio.

Initial impressions

James Tirado

The FX5 is an evolution of the FX3 concept that tries to accommodate a wider range of users, and we doubt any one user will want or need the full range of its capabilities. Where the FX3 was essentially an a7S III in a more video-friendly format (or, perhaps, the camera the a7S III should have been, in the first place), the FX5 is a much more capable machine that tries to address multiple different workflows.

Small scale cinematographers can adopt its Raw workflow, while others might choose to shoot open gate and some users will output H.265 UHD files in S-Cinetone. Some people will build it into a rig, others will mount it on a gimble, while others will leave it on ‘sticks.’ The fact that the XLR handle and EVF module are optional suggests that these are option that some people will find essential while others would resent the bulk and cost of something they don’t want. Then there’s the Ethernet port, which allows the camera to be mounted and operated remotely, for applications such as churches, we’re told.

In doing so, though, Sony has made the camera a fraction larger, but probably not to the point that it would alienate many of the run-and-gun shooters who came to love the FX3.

However, the major changes to the user interface, including its frequent decision to reboot, if you accidentally select the wrong frame rate, while changing settings, are likely to make the camera seem surprisingly daunting to existing FX3 users.

James Tirado

Sony talked about adding features and capabilities that have been requested by users, but it also feels like the FX5 is much more a product of the cinema department, like the FX6, rather than having evolved from an Alpha model, as the FX3 appeared to. A lot of the features (not least Raw) might have trickled down from the Burano, but an awful lot of the interface and operational logic has done, too, which is likely to be something of a shock to anyone primarily familiar with the FX3 or 2.

James Tirado

It its favor, it’s stayed in the relatively compact body that has made the FX3 a success, but this means there isn’t room for the variable ND filter system that slides in filters from below the sensor on the bigger camera, that a lot of users were hoping for. Additional options like a USB timecode sync cable aren’t necessarily going to excite a lot of independent FX3 users, but they broaden the camera’s appeal.

It’ll be interesting to see whether Sony decides that the FX5 (or, rather, the existence of both the FX5 and FX2) means that it doesn’t need to create a direct replacement for the FX3.

Viltrox seems poised to start selling lenses for Micro Four Thirds, according to a post on social media platform Xiaohongshu. It shows a puzzle piece about to be slotted into a hole labeled “M4/3,” and teases an announcement coming on July 23rd. While the company hasn’t posted about it on its Instagram pages, the Viltrox US account did comment on a Reddit post about the teaser, saying “Something new coming soon.”

The teaser doesn’t say what to expect, beyond having hashtags that translate to “lens.” But the idea of getting a Micro Four Thirds lens from Viltrox is exciting on its own; the company has become a major player in the world of third-party lenses, and it’s an interesting sign that it’s looking to throw at least some of its weight behind the mount, as we haven’t seen many others do so for a while.

Viltrox

There are a wide variety of companies, well known and not, making manual focus lenses for the system, and a few that continue to sell a handful of autofocus options, too. But beyond Panasonic and OM System, who also make cameras using the mount, there haven’t been any new Micro Four Thirds lenses from a major player in quite some time. Sigma used to have some options for the system, which you can still buy, but they haven’t been updated like we’ve seen with the company’s APS-C and full-frame offerings.

Of course, there are many ways to release a lens for a system. While Viltrox could come out with a lens custom-designed for Micro Four Thirds, with a sensible focal length and a small, compact size. It could also, however, just be swapping out the mount on one of its existing APS-C or, worse, full-frame designs (not that such a move would be unheard of). Even if it is a lens with a larger-than-neccesary image circle, though, it’s still a start. If whatever Viltrox releases ends up being successful, it could lead to the brand giving Micro Four Thirds more attention.

Or it could wind up being something completely unexpected, like a camera that uses the mount. It’s hard to put anything past companies at this point. Whatever it is, we won’t have to wait too long to find out.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

Sony has released a teaser for a new product announcement in its cinema line. As always, the video is very short on details, showing just the silhouette of a camera, tally lights blazing and a top handle attached, and the tagline “lighting the way forward.”

The company is no stranger to posting teaser videos, but, unlike with the one for what turned out to be the RX10 V, it isn’t giving a lot of time for hype to build. The video says the announcement is coming on July 22nd at 7 AM PT (15:00 BST), which is just around 24 hours after the video was published. Whatever the camera is, it seems we won’t have to wait long to get more details.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

The latest version of Adobe Camera Raw, 18.4.1, started rolling out a few weeks ago, but it quietly introduces a feature that I’ve personally wanted for years: the ability to see where your camera’s focus point was set to. This makes it much easier to tell whether it was your camera’s autofocus system that messed up, or if you simply put the focus point in the incorrect place (which is especially important when, say, you review cameras for a living).

The way it works is relatively simple (if a bit of a finger workout): you open up a Raw in ACR, and press Ctrl + Alt + Shift + O on Windows, or Command + Option + Shift + O on Mac. You can also right click on the image and select the “Show Autofocus Points” option. After you do, ACR will draw a red box around the camera’s selected focus point or area.

Screenshot: Mitchell Clark

While the feature isn’t a fool-proof way of assigning blame for an out-of-focus image – if the box is in the wrong place, it could either mean that you put it there in error, or that your camera’s tracking failed – it’s still very nice to have access to this information without having to view it on your camera’s screen, or in camera makers’ own software. Sometimes it’s just nice to be able to check where you were trying to focus, or, to pick a random example, to see where the photographers from your favorite camera review site were focusing in the images they uploaded to their sample galleries.

Currently, the feature is available for Raw files from Canon, Sony and Nikon cameras. We confirmed that we weren’t able to see autofocus points from the most recent cameras from any other manufacturer, so hopefully Adobe will expand the models it’s available to in the future. We’d also hope that this feature, which is currently only available in Photoshop’s ACR module, makes its way to Lightroom and Lightroom Classic, too.

ACR 18.4.1 also adds a “presentation” mode that shows the photo you’re editing full-screen with a customizable matte around it, and which lets you use the arrow keys to move through the photos you currently have open within the tool. It also lets you use the company’s AI-powered “Generative Expand” feature to fill transparent edges, and improves bidirectional gradient masks, adding support for feathering and giving you more precise control over them. You can download the update through the Creative Cloud app, or via the standalone installer.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

The U.S. Federal Communications Commission (FCC) is proposing a retroactive ban on suspected DJI‑linked drones and cameras, affecting products sold under brands like Xtra and Skyrover. The move escalates last week’s announcement of proposed $25,000 fines against eight companies that allegedly ignored FCC inquiries about DJI‑related gear marketed in the U.S., penalties that were technically for non‑response rather than the hardware itself.

In the past, the FCC’s decisions generally couldn’t touch products that were already approved, but a recent rule adjustment changed that. As The Verge reported, in late 2025, the Commission amended its equipment‑authorization rules so it can now restrict the import and sale of previously approved devices from companies on its national‑security “Covered List,” without formally revoking those original approvals or disabling gear that’s already in users’ hands.

DJI itself was added to the Covered List in late 2025 after a national‑security review under the Secure and Trusted Communications Networks Act, a designation that already blocks new DJI radio‑equipped products from receiving FCC approval in the U.S.

Skyrover

This could be the first time the FCC uses its new power, with potential bans on products from Cogito, Fikaxo, Lyno Dynamics, Skyhigh Tech, Spatial Hover, SZ Knowact, WaveGo, Xtra and XAG. The Commission says those products “pose an unacceptable risk” to U.S. national security because they are suspected of containing DJI‑designed radio components under different brand names.

Those who already own products from the at-risk companies won’t be impacted by the FCC’s decision and can continue using them. However, affected drones and cameras are expected to disappear from major online retailers and from the brands’ own sites if the order is finalized, and unsold inventory in the U.S. could need to be written off.

The FCC is accepting public comments for 30 days, so the ban won’t take effect immediately. The Commission says it will consider “specific evidence” that might show the products are compliant, though, as The Verge points out, the organization doesn’t have a great track record of listening to public sentiment. If you would still like to voice your opinion, you can do so via the FCC’s Electronic Comment Filing System on the FCC website.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

It’s been about two weeks since we launched the new DPReview website, and our team is still hard at work. Along with fixing some critical behind-the-scenes bugs, we’ve been collecting your feedback and have already made some fixes where we could act quickly, with much more to come.

In the whirlwind since launch, however, there’s one new feature we haven’t talked about much: it’s now possible to see fewer ads on DPReview.

Ads were a source of frustration on the legacy site, and the new site gives you an easy way to cut down on them.

How to see fewer ads

It’s simple: use DPReview while logged in. That’s it. Logged-in readers see fewer ads, particularly the most disruptive kinds, like motion-heavy and video ads.

To be clear, this isn’t an ad-free experience; you’ll still see ads, just fewer of them. Consider it our way of thanking logged-in readers for your support as we continue to improve the ad experience for everyone.

Don’t have a DPReview account? Now’s a great time to create one. Just click the Register link to get started.

We know nobody loves ads. Believe me, we don’t either, but they’re a necessity to keep the site running. It costs real money to operate DPReview, and advertising is an important part of how we cover those costs. It’s not our only source of revenue, but it’s one of the things that lets us offer all of our content for free, whether you visit every day or once in a blue moon.

We also get why people use ad blockers. The reasons aren’t lost on us. We just ask you to keep one thing in mind: when you block ads, you’re not only preventing us from earning revenue, you’re actively costing us money. A photography-rich site uses a lot of bandwidth, and that’s a big part of our expenses. Every time you load our content without ads, we lose money, which makes it harder to do things like pay our writers and maintain our servers.

So if you’ve been browsing with an ad blocker, we ask that you try the new site without it (while logged in). We think you’ll find the ads less intrusive than they were on the legacy site, and you’ll be helping us stay on the internet.

In case you missed it

If you haven’t seen our earlier coverage about the new website, a few links are worth your time:

Gear Patrol founder and CEO Eric Yang – a DPReview user for over two decades – wrote about why we needed to rebuild the site from the ground up, including some helpful historical perspective.

If you want to track improvements as we make them, report a bug or usability issue, or just discuss the new site in our forums, we’ve published a guide on how to do that.

Finally, thank you for bearing with us as we improve the site. We know some things aren’t working as expected and that there’s plenty left to fix and improve. We appreciate your patience while our team works overtime to address those issues so we can remove the beta logo from the site.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

After becoming a go-to brand for tripods and various ways to carry your camera around, Peak Design is tackling the next piece of the puzzle: the L-bracket. As is its usual style, the company isn’t content with simply making a piece of hardware that makes it easy to switch between portrait and landscape shooting. Instead, it has built the Field Bracket as a modular system, launching it alongside additional accessories that aim to solve multiple issues.

The Field Bracket takes design cues from the “Field” tripod plate the company released last year. Like the Field Plate, the L-bracket doesn’t require a tool for installation. Instead, it uses the company’s “Field Latch” mechanism, which features a tab that pops up with the press of a button, turning into a thumb-drive handle. That means no more relying on having a hex tool on hand at all times.

Peak Design

The tool‑free design makes it quick and easy to attach the part of the bracket that goes up the side of the camera, transforming from a simple base plate into a full L‑bracket for shooting in portrait orientation on a tripod. Users can also adjust the upright position to provide room for tethering cables, making it easier to use in a studio setup. The Field Bracket is camera-specific, with versions for select Sony, Canon, Nikon, Fujifilm and Leica camera systems.

Peak Design says that the Field Bracket is the base of a modular system of accessories. In that spirit, it’s also launching the Beacon Finder Tag, a smaller version of its card-sized tracker that it released with its wallet system and which ties in with Apple’s Find My ecosystem. Peak Design says the tag is the first tracker specifically designed to fit in Arca-compatible camera plates, offering a discreet way to keep track of camera gear.

Peak Design

The company has also created a few additional new accessories for the Field Bracket. Its Cheese Plate adds 1/4″-20, 3/8″-16 and cold shoe mounting points for adding accessories like lights, mics, monitors and more. There’s also a hand strap, making it easier to work handheld with it attached to your camera. No matter which accessories are attached, Peak Design says all your camera’s ports and controls will remain easily accessible. It also allows full integration with existing Peak Design accessories, such as its camera straps and Capture Clip.

As is typical for Peak Design product launches, the new gear will first be available via Kickstarter (its 17th such launch). The Kickstarter campaign will allow users to purchase the system at a discount before the retail release. The camera-specific Field Brackets have an MSRP of $150, while the Cheese Plate, Hand Strap and Beacon Finder tag will be sold separately, starting at $40.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

Last year, Adobe’s Nextcam team launched Project Indigo, an experimental camera app for iPhones that offered full manual controls and promised a more natural look from smartphone photos. Now, the team has announced AI Playground, an experimental generative AI tool inside of Project Indigo.

In its announcement, Adobe explains that text-based editing (e.g., asking an AI chatbot to make changes to a photo for you) is still clunky, both in its results and usability. This new tool aims to improve that experience by keeping more of the process – both capture and edit – in one app. It says that AI Playground aims to “explore how generative AI can assist mobile photographers at the point of capture.”

AI Playground offers a handful of buttons that, when tapped, trigger specific generative AI prompts engineered by Adobe. These include options for removing distractions, creating a shallow depth of field, applying certain styles, changing lighting and critiquing photos. There’s also a Custom Edit button where users can input their own prompts, either via typing or dictation. For now, Adobe says it is using Google’s Nano Banana model, but that is subject to change, and may even change on a per-button basis.

Adobe

The “Styles” button allows users to apply a range of preset styles, turning photos into drawings or paintings or changing the lighting. Adobe says the available options “represent techniques we have found to be most successful when applied to everyday snapshots,” so it isn’t an endless list. It also clarifies that it trained the model to identify and highlight the main subject to keep focus on the most important parts of the photo.

Adobe

Object Editing offers tools familiar to editing apps, but Adobe says it is “exploring whether simple editing operations can be performed in the camera app using a generative model.” There are buttons for removing distractions and creating a shallow depth of field. If those specific tools don’t cover what you are looking to do, the Custom Edits button lets you change almost anything, similar to standalone generative AI tools. That includes completely swapping out backgrounds and specifying different styles. Adobe also showed off the ability to turn a drawing into a photo-like image, or change a sculpture into a “real” person.

Adobe

Adobe also highlighted the feedback section, which looks to be a more robust version of Google’s “Camera Coach,” albeit one that critiques photos after the fact, rather than giving you suggestions as you’re composing. It says that it is aimed at helping users learn or advance their photography by providing critique. The tool can provide both reshooting suggestions since it operates within a camera app, along with editing suggestions. Adobe says it is “working on customizing these prompts to reflect individual phone models and lenses, each of which has unique capabilities,” so that users get suggestions specific to what their phone is capable of.

There are some caveats with the AI Playground. First, while it’s free (for now) and doesn’t require sign-in, Adobe is only rolling this out to a small percentage of Project Indigo users. It says that if AI Playground is successful, there will be a paid version. Adobe also makes it clear that this is an experiment inside of an experimental app, so things are subject to change. You need to be connected to the internet to use AI Playground, and to save transmission and generation time, images are 2K pixels on a side.

Adobe

The Nextcam team also explains that it has had to create a workaround for HDR images, as image-generation models only output SDR images at this point. So, if you use Nano Banana to edit an HDR photo (even one taken with Project Indigo), it will produce an SDR image. To address this, Adobe says it built a custom ML model to post-process the SDR image and boost it back to HDR, but warns that it isn’t always accurate.

The announcement also briefly addresses ethics as well. Adobe says it is “working to attach metadata to AI-edited images produced from the AI Playground by using technology from Adobe’s Content Authenticity Initiative,” and specifies that some models, such as Nano Banana, apply invisible watermarks to images. At the end of the day, though, Adobe puts the onus on users: “Whether the edits you apply are ‘fair’ or ‘misleading’ depend on what you do, who you share the images with, and how you present them.”

Adobe

Ethics aside, it seems like an interesting move for the app, given that the original goal of Project Indigo was to produce more natural images that offer “SLR-like” quality from your iPhone. DPReview’s Dale Baskin even chose Project Indigo as his Gear of the Year last year, because it unlocked the ability to take more natural images, encouraging him to use his phone for photos more often. The AI Playground tools, however, seem to take things in a very different, more synthetic direction.

Additionally, the results, at least for now, don’t necessarily inspire confidence. The image at the top of this article looks more like a video game rendering than a photograph, with a distinctly synthetic sheen rather than the ‘natural’ look Indigo set out to offer. Plus, in some instances, such as the cycling image above, Adobe acknowledges that the models will change details that you don’t want changed. That includes altering face shape and expressions, even if it isn’t part of the user’s prompt or intent. The company’s workaround is to upload reference photos, which certainly isn’t ideal.

For those interested in testing AI Playground, you’ll need to update the Project Indigo app to version 1.1. If you are one of the selected users, you’ll see a screen pop up inviting you to use the feature. If you’re not a fan of GenAI in your camera app and you get invited, you can simply decline and keep using Project Indigo as you did before. Adobe also says that the Nextcam team is working on non-GenAI computational photography features that it plans to launch soon.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

I’m not completely shocked that Sony updated the RX10: the existing model was clearly out of production and increasingly silly second-hand prices suggested there was pent-up demand. And now the work of integrating more modern components with a Type 1 sensor has been done, surely an updated RX100 will be next?

I found myself thinking about what that might look like, and the more I do, the more I suspect it won’t be what I want.

Two years ago I made the argument that there is a market for enthusiast compacts: small cameras with decent image quality and sufficient direct control to give a satisfying photographic experience. I proposed an RX100-style camera with a less-expensive sensor and the original 24-70mm equiv F1.8-2.8 lens. Sadly, that’s not what I’m expecting Sony to make, at all.

Sony is a technology company. A technology company that makes some very good cameras, but ultimately a company that believes that their cameras will always be made better by throwing more and newer technology into them.

So instead of the stripped-back camera with direct controls and a (relatively) accessible price tag that I’d love someone to make, I suspect we’ll get a camera with, at the very least, all the bells and whistles of the RX10 V. I’m going to guess it’ll have the rangier but slower 24-200mm equiv lens, the ability to shoot at framerates around double the speed of a pro-targeted DSLR and a list price of at least the $1500 that the VII’s launch price would equate to, today.

And thinking about this made me remember how frustrated I’ve always been with the RX100 cameras. Because, with their introduction of the Type 1 (13.2 x 8.8) sensor to the compact market, they represented a huge step forward in terms of how much image quality you could fit in your pocket. The JPEG color on the first one was perhaps a little wonky but that 116mm² sensor was nearly three times the size of the Type 1/1.7 (43mm²) chip that had dominated the space up until then, and that’s the kind of difference you could see in every photo.

Richard Butler

But despite the appearance, price and that short, bright lens, the RX100 never felt like an enthusiast compact. Compared to the likes of the Olympus XZ models or Canon’s G and S-series cameras, the Sony sorely lacked engaging control points. Typically I’ll use an enthusiast compact in Aperture Priority mode, so would want to be able to control the aperture value and exposure compensation: both of them settings that adjust in fixed, stepped intervals. The RX100 doesn’t have a well-placed clicking control point, meaning you have to change most settings via the vague, free-rotating ring around the lens. There’s a lag before it recognizes that your input is intentional and there’s no tactile feedback that you’ve changed anything.

The result, even before you visited the old, rather chaotic menus, was a user experience that left you feeling detached from the photo taking process: the precise opposite of what I believe a standalone camera needs to offer. The RX100 series have always been products whose engineering I admired, rather than cameras I enjoyed.

I remember being advised “stop trying to make it do what you want, and just use it as a point-and-shoot,” and finding that helped. But if I wanted to just take snaps, I’d probably use a smartphone, because the phone makers know their devices aren’t about taking control, so they’re happy to shoot and combine multiple images with every shot, letting them rival or exceed the image quality of a Type 1 camera taking single photos.

I could be wrong, of course. Sony might significantly rework the RX100 to make it fun to take control of. Or it might not make one at all. And, even if it does, I’m not going to assume that the things I, personally, want are the things that the market as a whole wants: Sony will have a much better idea of what sells and what doesn’t, and of what would-be customers are asking for.

But, while the whole thing remains hypothetical, you can’t blame me for hoping.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

As we enter the second half of this year, I wanted to take a moment to say thank you for all your fantastic contributions in the forums and elsewhere, and to consider where we go next together on a community level.

One of the great things about our community is that every day I see photographers talking about their exciting new G.A.S. purchases (my own “needs” list keeps expanding, too), sharing unique photos like the above and reminding each other that we truly have a special place that supports both gear and photography interests.

So far this year, you’ve started so many fantastic discussions, several of which are still ongoing as of several weeks ago.

One of the community’s great strengths is when you engage with each other and constructively answer questions from both new and old members. Thank you for inviting those new members into our community.

Ab S

Showcasing your content

One of the most exciting initiatives you’ve continued to proudly coordinate for years now are the weekly photo threads. I love these because every day brings a new opportunity to give you a reason to share your photography on a fresh topic.

For those who are not aware, various community members (often from camera-specific forums) coordinate weekly photo showcase threads that encourage everyone to post a photo on the week’s topic. Topics range from nature to indoor decorations to photos taken with a specific camera brand, and sometimes it’s completely open-ended. They are usually more informal and less rules-based than structured photo challenges, which you may have also heard about. Everyone is welcome to participate. Feel free to include a short story along with the photo.

If you are a new member and need a way to “break the ice” on getting involved, sharing your photography wherever you can is a great start.

If you are new to photography itself, don’t feel like you’re “not professional enough” because there is no such thing. Our community is not some elites-only club, even if it feels intimidating at first upon seeing a technical-heavy discussion in forums like Studio and Lighting Technique.

cezirkle

What’s next for our community

I’ve seen some great ideas about how to make the forums an even more valuable and enjoyable place to share your gear choices and photography. I’m committed to giving all the content you create the support it deserves, even if it takes a little while to develop support programs for it. Please keep those great ideas coming.

Here are a few of the projects I’m looking forward to collaborating on with you all over the rest of the year and into the next:

• Create more activities across the forums, including within the photo and album system itself, to maximize opportunities to share your photography. This includes expanding on the per-forum section photo albums we created just a couple of months ago.
• Explore better ways to showcase your gear and photography how-to guides and community reviews – a place that would keep them more in the spotlight than an endless ongoing forum of posts that would otherwise eventually bury the guide.
• Ensure the rest of our community outside the forums has more opportunities to become aware of and contribute to your discussions and activities. This includes us reaching out more on places like reddit to bring them to the forums. Do you know about a photography group that we could invite to our community? Please let us know! 

wouterv

Whether you’ve been part of the community for more than 25 years, or this is the first DPReview article you’ve read, I hope you will stop by the forums and say hello. While you’re there, feel free to share your photography. We can’t wait to hear from you!

Special thanks to community members, nick10, cezirkle, Ab S and wouterv for their photos being spotlighted in this article. You can find these photos and more in the weekly photo threads.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

Tamron’s 12-20mm F2.8 adds a fast, ultra-wide option for Sony and Nikon shooters. It goes wider than its rival zooms on the Z-mount and is smaller and lighter than its closest competitor on E-mount, making it an interesting addition to both systems.

We had a chance to use it, prior to launch, with Mitchell taking it with him on his vacation out beyond Eastern Washington. He’s been sending back samples, to broaden the range of the gallery. Have a look to see how this compact ultra-wide performs.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

I’ve always liked enthusiast compacts: relatively small cameras with built-in lenses and a decent level of direct control. A camera I can travel with but still enjoy using. But, following a halcyon period in the early 2010s, the available options dwindled to the point that it became almost impossible to buy one.

However, things seem to have moved on since CP+ 2025, when we received relatively little enthusiasm from the manufacturers we asked about the prospects of a compact camera revival. The first flicker had already come the year before, from a slightly unexpected quarter, when Leica announced the D-Lux 8, a refreshed version of the enthusiast model last updated 6 years prior.

Richard Butler

Then, perhaps even more unexpectedly, in mid 2025 Sony updated its full-frame, prime lens compact, the RX1, a decade after the previous version had been released. It was not a camera I expected to ever see, as I thought its job as a signifier that Sony ‘gets’ photography had been served, now that its full-frame Alpha cameras have received such widespread uptake. But, while some reviewers insisted it should have been more ambitious, I found the camera that actually existed to be one that addressed almost all the shortcomings of its predecessor, and added up to an excellent (albeit determinedly niche) photographers’ compact.

Signs of life

By 2026, the tone of many manufacturers has changed when asked about the market for compacts, and these past few months have seen the release of two major updates of well-liked, but seemingly abandoned models.

The Panasonic L10 is a substantial reworking of the LX100 series, eight years after the last model. It brought a larger body and the same, rather laggy zoom, but, like the RX1R III, it directly addressed the biggest criticisms we’d had with the previous versions. So again, while it’s easy for armchair R&Ders to demand more, the thing that you can buy is rather good.

And now we have the Sony RX10 V, which brings the latest autofocus and video performance levels along with a bigger battery, better viewfinder to a (comparatively) large-sensor superzoom, bringing into sharp relief the degree to which camera performance has continued to improve in the 9+ years since the last version. Even if image quality appears to have plateaued (or even peaked?) for now.

Richard Butler

All four models have been met by derision from some quarters, not helped by the cumulative effect of inflation driving the prices up, in money terms at least. Others have criticized the degree to which these new cameras depend on existing parts for some of their key components (in all four cases, the lens designs date back around a decade, to the often less-demanding pixel counts of that time). And it’s true that none of these makers have shown the faith in the enthusiast photo sector that Canon and Sony did in the vlogging market, when they spent the money to develop new optics for the likes of the PowerShot V1 and ZV-1 II. But most of them got redesigned bodies and accommodate different batteries to their predecessors, so there’s more than just parts-bin diving going on.

Another criticism we’ve seen is that you can buy an ILC more cheaply. And this is sometimes true, even if you exclude second-hand and end-of-life bargains that no new camera can ever compete with. But, even in the (very) few instances where you can closely match the spec of these enthusiast compacts, while maintaining a similar level of hands-on, direct control and competing on size, it usually turns out that the person making the criticism simply doesn’t like the concept of fixed lens cameras, which can lead to the whole point of such cameras being dramatically missed.

There are times when you want the near-endless flexibility of an ILC (or ‘system camera’ if you prefer). But sometimes, some of us want a smaller camera, or a self-contained one. One that does the thing it’s designed to do, without constantly inviting the cost of additional lenses or forcing you to ponder which combination to pack.

I’m not, at this point anyway, suggesting we’re entering another golden age of enthusiast compacts. It’s clear that the cameras we’ve seen so far are updates of existing models (and not necessarily upgrades, to the extent you might hope). Sadly, I don’t think anybody is about to put the effort into delivering a larger-sensor successor to the Olympus XZ-2, which to me remains the high watermark for enthusiast compacts, in many regards. But at least, for whatever concerns we might each have about pricing or increased size, there are, after all this time, options.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

We recently launched the new DPReview website with a beta logo at the top of the page. The site is in beta for a reason: we’re aware that there are things to fix and improve, and our team is actively working to address outstanding issues. The beta logo reflects our ongoing effort to improve functionality, features and the overall user experience.

To make sure you know where to find the latest updates, report bugs or usability issues, or discuss changes to the site, we’ve set up a dedicated forum section to consolidate this information in one place.

Keep updated on changes

Progress updates: To see the latest updates from our team, visit the dedicated Change log thread. This is where we’ll post updates to let you know what changes, updates or bug fixes we’ve made to the site. We are making updates on a rolling basis based on a combination of prioritization and ease of fix. We expect this process to go on for quite some time.

Report a bug or usability issue: If you encounter a bug or usability issue, please use the Known issues and bug reports thread in our forum to share it with us. We keep the first post in that thread updated with all the reports we’re tracking, so please check there first to see if your issue has already been reported before reporting a new one.

New site discussion: If you have other questions or just want to discuss the new site, please create a post in the Website redesign feedback, questions and help section of the forums.

One more thing: If you haven’t already done so, we encourage you to read our article Gear Patrol founder Eric Yang: Why we rebuilt DPReview after 25 years, which provides additional context for why we’re making this change now.

We’ve already heard a lot of valuable feedback, and will continue to gather it to help shape our development and improvement roadmap. Thank you for your patience, feedback and support as we get things dialed in.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

Kodak licensee Reto has quietly added another beginner-friendly 35mm camera to its analog lineup. The Kodak EC35 is a fixed-focus point-and-shoot aimed squarely at casual shooters and film-curious newcomers thanks to its affordable price and ease of operation.

The EC35 is a simple 35mm film camera with a plastic body and 25mm, fixed-focus, 2-element acrylic lens. It’s a point-and-shoot camera, featuring a fixed F10 aperture and a constant 1/100 sec shutter speed. It does offer manual film advance and rewind, though, for a more traditional film experience. There’s also a built-in flash powered by a single AA battery.

It’s highly compact, weighing 102 g (3.6 oz) and measuring 119 x 65 x 41.5mm (4.7 × 2.6 × 1.6″). It features a slide-out cover to protect the lens, just like highly popular retro compact film cameras, such as the Olympus Stylus (Mju series) and Contax T3.

Reto

While the camera uses Kodak branding, it comes from Reto, the Kodak licensee behind the viral Kodak Charmera cameras. Reto has been steadily rebuilding a Kodak-branded analog ecosystem with playful, affordable cameras like the Ektar H35 half-frame, the H35N half-frame and the Snapic A1, a compact with a 25mm three-element glass lens and double-exposure mode. The EC35 slots in as a more basic model that produces full 35mm frames, sitting below the feature-rich Snapic A1 with its LCD, auto wind/rewind and multi-exposure features.

The Kodak EC35 comes in six colors: black, white, yellow, lavender, light blue, light pink and light green. It’s available for purchase now for $35, the same price as Lomography’s recently released half-frame camera.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

Lomography is jumping on the half-frame trend with its latest camera. The appropriately named Half-frame Simple Use Reloadable Film Camera is an affordable option that aims to make film easy for those looking to explore the medium.

As a half-frame camera, it uses half of each 35mm frame, resulting in 17 mm x 24 mm vertical images and letting you get twice as many photos from a roll as a traditional 35mm camera. The small point-and-shoot looks like a classic disposable camera and comes pre-loaded with a roll that gives you 40 shots before you need to reload. Despite its lightweight, disposable-style design, the camera is fully reloadable, and with a standard 36-exposure roll, you can capture up to 72 images.

Lomography

Lomography designed the camera to be easy to use. It features a fixed-focus 21mm lens, a single 1/120 sec shutter speed, a fixed F9 aperture and no ISO adjustment options. It offers a built-in flash to help in low-light situations and has integrated gels to slide in front of the flash for pops of color. There are also shooting instructions printed on the camera body to help you use it if you’re new to film.

You can choose between two preloaded versions of the half-frame camera: one with LomoChrome Classicolor ISO 200 film, and the other with Lady Gray ISO 400 black and white film. You can also opt for a kit that includes six additional rolls and a case to store your film. Sitting well below options like the Pentax 17, it’s meant to be an affordable, casual way to enjoy film.

The Lomography Half-frame Simple Use Reloadable Film Camera is available for preorder now and costs $30 with black-and-white film and $35 with color film.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

Hasselblad launched Phocus Mobile 2 in 2019, as an iOS-only app for editing Raw files from its medium format cameras on phones and tablets. Now, the company has announced Phocus Mobile v1.0.0 for Android, finally bringing the mobile workflow to Android users with the X2D II 100C, X2D 100C and 907X + CFV 100C.

Like the iOS version, Phocus Mobile for Android includes a robust set of editing tools, including exposure, curves, white balance, sharpening, cropping, lens correction and more. It also supports batch adjustments and basic asset management with the ability to add ratings and mark favorites. Images can be imported over Wi‑Fi or, for those using the X2D II 100C (with firmware version 1.3.16.1 or later), via USB‑C. Files can then be exported as Ultra HDR JPEG, HDR TIFF, as well as standard JPEG, TIFF, HEIF or 3FR Raw.

Hasselblad says that the Android app brings its end-to-end Natural Color Solution (HNCS) to mobile, allowing for a consistent look whether editing on desktop or mobile. The app supports HDR viewing and editing for X2D II 100C files on compatible HDR devices. It also features the company’s AI-powered Raw noise reduction, which it says is tuned for its 100MP sensors. The noise reduction tool offers two modes, allowing users to prioritize either cleaner files or better micro-contrast.

There are some hardware caveats, though. The app requires an Android device with at least 12 GB of RAM and Android 12 or later. That said, Hasselblad recommends Android 16 or later and devices powered by Snapdragon 8 Gen 3 or newer for the best experience. Given that the phone needs to handle 100MB files, that shouldn’t come as much of a surprise.

Hasselblad’s Phocus Mobile for Android is now available on the Google Play Store for free.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

After more than a month of drama, the 2026 FIFA World Cup is finally heading into its finale, with the last games set for this weekend. Over the course of the tournament, a small army of photographers has been crisscrossing stadiums to keep pace with the matches and the stories unfolding around them.

One of them is Maddie Meyer, a Getty Images staff photographer who has spent this World Cup on the touchline and in the stands, documenting everything from tunnel nerves to wild celebrations. Meyer took the time to speak with me between matches, sharing insights into what it’s like to cover such an event and how she stays on top of her game.

Finding her way

Getty Images

While Meyer was always interested in photography, she didn’t start out wanting to be a sports photographer. She grew up in Washington, D.C., playing soccer and thinking she would follow the path of Doug Mills, a prominent New York Times photographer she’d known since childhood. “I’ve known him since I was 8, and I looked up to him so much,” she said. “I remember his pictures from the Torino Olympics and thinking this might be the coolest thing I’ve ever seen.”

Meyer recognizes that having Mills to look up to early on was quite important for her path. “It was so cool to have somebody in my life so early to show me this is a job you can have,” she told me. “He was super encouraging; he said the only difference between me and you is I’ve worked hard at this for 40 more years.” Meyer kept shooting through middle and high school and went on to study photojournalism at Ohio University.

She still thought she wanted to be a White House photographer until she started working with her college athletics department and realized how much she loved traveling with teams and being outside. That led her to apply for a Getty Sport internship in New York City, which quickly felt like the right fit. “I loved the pace and the scale and the intensity of it. After I graduated from college, I got hired in Boston in 2015. I have been here ever since, and I still love it,” she said.

Managing the chaos

Maddie Meyer – FIFA/FIFA via Getty Images

At this point in her career, Meyer is no stranger to long days and constant travel, but this World Cup has been especially demanding, with matches held in 16 cities across 3 countries. Group play was the most intense stretch, with 50 Getty editorial photographers bouncing between host cities to cover 72 group‑stage matches. “We were traveling the day of sometimes, so it was like, wake up, take a flight, check into the hotel, head to the stadium,” said Meyer.

Once she’s at the venue, the workday around a single match stretches to roughly 10 hours. Meyer said that the Getty team at a game (generally two to three photographers during group play) typically arrives about five hours before kickoff. They start by setting up remote cameras behind the goals and photographing the dressing rooms. When the teams arrive, the atmosphere shifts quickly. “Some of the African teams come and actually sing down the tunnels and the hallways with drums, which is really cool,” she described. “So I love that right off the bat, sometimes you get a really interesting cultural taste right away.”

From there, Meyer follows the team as they walk the pitch and go through their warmups, then moves into one of her favorite moments: the tunnel. “What I really like is getting access into the tunnel, where there aren’t other photographers, so to me, those are some of the more genuine moments that we see of these athletes before they step out and see these tens of thousands of people,” she said.

After the final whistle, one member of the crew typically goes out on the pitch with a steadicam. “I really love getting closer to those players, whether it’s the celebration, the dejection, it feels a little bit more intimate than using those really long lenses to photograph the action,” she said. They wrap up the day by capturing the press conferences and packing up before heading to the next city.

The long hours and frequent travel can wear anyone down, so Meyer leans on small rituals to keep herself steady. including bringing small things from home and making time for movement. She likes to bring a few comforts from home and find regularity where she can. “I love having my good-smelling soaps in the shower, little things that make me feel like I’m not just sitting in the rain in my raincoat all the time,” she explained. “I also always try to get some sort of exercise in, either walking or in the gym, just kind of moving my body, because most of the time, we’re kind of curled up in these weird positions.”

She also explained that sleep is non-negotiable. “I really believe I can do anything in the world if I have 8 hours of sleep,” she said. “I tell my colleagues, too, listen, if we’re not sleeping and we’re running between places, let’s be really gentle with each other the best we can, because we’re running on fumes sometimes.”

What goes on behind-the-scenes

Maddie Meyer – FIFA/FIFA via Getty Images

Meyer and her teammates certainly have their hands full during an event. She told me that she typically has four cameras in action during World Cup matches: one remote camera behind the goal, and three on her. She usually fits those handheld cameras with a 400mm lens, a 70-200mm, and, depending on her placement, something wide-angle to catch close action. Across the team, there are multiple remotes behind each net, all positioned to cover key moments around the goals.

Before kickoff, Meyer sets up the remote camera’s exposure and focus, making sure it’s ready for action near the net. She explained that the remote cameras behind the goals are hardwired, as there’s far too much interference to rely on wireless connections during matches. It is still manually triggered, either by remote editors or by someone nearby using a foot pedal.

From the opening match on June 11 to the final on July 19, the Getty Images team will have shot more than 2.6 million images. Thankfully, the photographers aren’t working alone. The Getty Images FIFA World Cup team consists of 115 people, including 20 editors in New York who help oversee operations and are ready to receive images as they come in.

“They have a diagram of where everybody is. So after a goal is scored, they’ll say, ‘Oh, that’s in Maddie’s corner, take a look at what she’s sending us.’ So they’re able to prioritize whose work they want to look at to get those pictures out quickest,” Meyer explained. She works under a “tag and send workflow,” meaning she looks through and sends pictures that she wants the editors to see, often within seconds of something happening.

The remote cameras are handled differently. Those are set to send all of the images to New York as soon as the cameras fire. Once the editors have the photos, they crop, tone, caption and send the pictures out for use. A Getty Images representative told me that they can have photos ready within 30 seconds of capture, often before television replays are available.

Meyer explained that the current process is vastly improved from when she first started. “In 2015, I photographed the Women’s World Cup, and it was self-edit, so I had my laptop out on the sideline, and it was super challenging,” she explained. “Versus now, it’s just such a win for everybody. The editing team does a way better job than me out in the sun, squinting into my laptop. And also, I’m able to shoot more and really focus on the game.”

Staying prepared

Maddie Meyer – FIFA/FIFA via Getty Images

With so much happening around each match, Meyer tries to go in as prepared as possible. “I think it’s always great to understand the key players and some of the storylines,” she said, noting that her European colleagues have been especially helpful since they see many of these players regularly and can flag people to keep an eye on.

More than scouting, though, Meyer focuses on her particular location for the match. “We’re assigned where we’re shooting, and so I really think about the backgrounds, how the game is gonna kinda flow,” she said. She went on to explain that she’s also very intentional about which moments are hers to photograph, versus ones that are better for her colleagues to capture. “I really think this is my little piece of the pie, this portion of the field,” Meyer said. “I’m gonna really think about what lenses show off what’s going on here.”

Meyer said she also thinks about her mom a lot when photographing. “She’s a big Maddie fan, but not a big sports fan,” she said. “And I always think, what would I tell her about today? What makes this different? What makes this interesting? What makes this special?” She uses that mindset to make sure she’s telling the bigger story, making it interesting for more than just die-hard soccer fans.

Another challenge Meyer faces is making her pictures feel distinctive. “Sometimes the photos do end up looking the same as the person sitting next to you,” she explained. “I try to think about lens choices – can I shoot really wide to show atmosphere? Tight to show details or faces? A very shallow depth of field to highlight the action? That can be where the difference comes into play when our position can’t be unique.”

A favorite moment on the world stage

Maddie Meyer – FIFA/FIFA via Getty Images

As the 2026 World Cup nears its end, Meyer doesn’t hesitate when asked about a favorite moment from the tournament: the Egypt–Argentina match. She was roaming rather than in an assigned spot on the touchline, which she said presents a fun challenge, since she can go anywhere and doesn’t have set compositions and backgrounds in mind as she does otherwise.

There had been lots of back and forth, but Egypt was up towards the end. She got a message saying they would have access to the Egypt locker room, asking whether she would go in with them if they won. “I was like, okay, do I leave before the match is over to wait outside their locker room, or do I stay up a little bit longer?” she recalled. Then, Argentina scored, and she decided to go with the Argentina fans and figure out how to get to the locker room later if she had to.

“The Argentina fans are incredible,” she said. “These people are so passionate. They travel so well. They have the instruments. They’re just out of their minds in the best way that you want to see.” She also told me that she loves how much they want everyone involved, and they are not shy about having a photographer in their midst.

“They ended up winning, crying, shirts off, screaming, and I have all these pictures with a 15mm, and all these people, it’s like, babies, old men, young people, and that was super memorable to me, of just kind of being in that chaos,” she said. “Being on the pitch, it feels pretty high pressure as a photographer, but up there, I was like, I’m in this. And they’re like, ‘Get in here, sister!’ I’m like, okay, I’m not celebrating. I’m gonna photograph you celebrating. One of the guys took my phone and was like, ‘I’m taking pictures of you!’ It was just, like, the rails have come off up here.”

For Meyer, that moment captures a lot of what makes the World Cup special. “What I think is so fun about the World Cup is just how passionate these people are, and getting to be maybe a little bit too close to them even was great,” she told me.

Beyond the World Cup: why the small games matter

Maddie Meyer – FIFA/FIFA via Getty Images

While Meyer is photographing on the big stage these days, she is quick to stress that professional events aren’t the end-all, be-all. “Even though I love being at the World Cup, it’s not all about the World Cup,” she said. “There’s so much joy, and sometimes, frankly, better pictures in the smaller events, in the high school, in the college, in the MLS, NWSL, all those types of things.”

It’s a good reminder that although big events like this get most of the spotlight, smaller events are important, too. “As much as I love it, and I love talking about it, I never want people to leave talking with me, thinking it’s this or nothing, because there’s a picture to be made at every single level,” Meyer said.

You can see more of Meyer’s work on her Instagram or through Getty Images.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

This is the story of Max Lowe, a filmmaker, photographer and storyteller based in Bozeman, Montana. Recipient of a National Geographic Young Explorer’s grant early in his career, Max’s work ranges from wildlife filmmaking to deeply personal, human-centered stories. In our conversation, he spoke about learning photography through trial and error, discovering magical places around the world and finding serendipity and inspiration in his own backyard.

Our ‘What’s in your bag?’ community spotlight series features readers sharing their favorite gear and photography, including from past DPReview collaborators such as Max.

Meet Max Lowe

Max Lowe

Photography became a way for Max to engage more deeply at home in Bozeman, Montana, eventually leading to a career spanning National Geographic Expeditions, documentary filmmaking and editorial photography. While he has photographed hundreds of places around the world, he says one of his biggest creative challenges remains capturing the essence of his hometown.

“I’ve never been able to truly capture the essence of the way I love Montana. It’s a place where people put their own interpretations. It’s a place I want to keep finding new ways to illustrate to the world, because it holds that depth and importance to me as my home.”

Max’s parents were a major influence in starting his photography career. “I grew up with a mountaineer for a father, and my mom was an artist. At some point, my mom gave me one of her old cameras. Both my mom and dad made it in the world in different artistic ways. Because of that, I felt I needed to find an artistic path for myself, and photography became that for me. Photography has this magical way of making you feel like you belong somewhere you otherwise might not.”

Career and projects

Max Lowe

One of the most significant turning points in Max’s career came in 2012, when he received a National Geographic’s Young Explorers Grant. That opportunity led to trips with National Geographic Expeditions that continue to this day, and the grant community introduced Max to many of the photographers, filmmakers and storytellers who helped shape the work you see in this article.

“In the earlier years of my work as a full-time photographer and filmmaker, I had more personal ambition to just go places for the sake of going, in the selfish sense. At this point, I’m more compelled to travel because I can get a unique lens on the world – pun intended. There are really cool photography-focused trips that many companies put on, but National Geographic Expeditions goes to some rather remarkable places. I’ve been lucky to make many friends within the National Geographic scene, fellow photographers I look up to and reach out to for collaboration. That camaraderie is what really makes it special.”

Max’s documentary work

Jack Fox

One of Max’s current projects is The Kind Ones, a documentary he’s producing with his wife, Lia. They spent eight weeks at a rural hospital on the North Carolina coast, where Lia worked as a travel nurse while Max documented patients, nurses and moments of care. He described the careful balance between telling meaningful stories and respecting the people involved.

“During the pandemic, everyone rallied around healthcare workers, but in the years since, these tremendous workers just fell back to where they’d been before. After the pandemic, Lia was at a low point in her career. She wanted to talk about the fact that the humans within the healthcare system are often disregarded as a major component of how we function as a healthy society.”

Max Lowe

“We were filming with her every day, capturing beautiful and often difficult moments with patients. Her portrayal of the value nurses bring, not only in the medical care they render, but in the human care and appreciation for life in its most complicated moments. The project is a challenge: working together in a nuanced way to think about what to photograph, and especially what not to.”

Kind Ones is scheduled for release in late 2026. If you’re interested in Max’s other film works, including the acclaimed feature doc detailing his own family story, “Torn” (2021), the Oscar Shortlisted “Camp Courage” (2023) and more.

What’s in Max’s bag

Max Lowe

Max’s approach to equipment depends heavily on the project, though when it’s a personal endeavor, he has some go-to favorites.

Max’s go-to gear:

• Nikon Z8
• Nikon Z6II
• Nikon ZR
• Nikon FG
• Rolleiflex

Lenses:

• Nikkor Z 26mm F2.8
• Nikkor Z 24-70mm F2.8 S
• Nikkor Z 70-200mm F2.8 S
• Nikkor Z 14-24mm F2.8 S
• Nikkor Z 180-600mm F5.6-6.3
• Nikkor 50mm F1.8 Series E
• 2X teleconverter

Favorite camera: When traveling on his own, Max prefers simplicity. One of his favorites is a Rolleiflex 4×4 medium-format film camera, which he uses regularly for personal projects. “I still shoot quite a bit of film, mostly for my own interests. The Rolleiflex is a bit complicated to use. I’ve failed to properly expose images plenty of times. Unlike modern digital cameras, it offers little immediate feedback. Sometimes you shoot a frame you think will be great, only to blow the exposure or end up with a blurry image.”

Max Lowe

Max has found hidden benefits in the challenges of shooting film. “There’s something cool about photography being this format in which we can learn to fail and do better in small, incremental ways. You’re really forced to learn about ISO, shutter speed, aperture and all the other functions of a camera.”

Still, the camera Max uses most often is the one already in his pocket, an iPhone 16 Pro Max. “Probably the camera I use most is my phone, honestly.” Rather than focusing on gear for its own sake, he emphasized carrying equipment that lets him remain present with people and stories while staying ready when meaningful moments arise.

Photography ethics

Max Lowe

Throughout our conversation, Max returned to the idea that storytelling requires trust, context and respect. He believes photographers should continually ask themselves why they’re taking an image and who ultimately benefits from it.

“Trust is paramount in our work, especially when we’re working with other people. If it’s someone sitting alone on a subway platform crying, I probably wouldn’t shoot a photo of that, because it would feel exploitative. But if you go up to the person, ask them what’s wrong, hear their story and get a little more insight into what they’re experiencing, and then ask if you can shoot a photo of them in that moment. You’re going to get a more compelling image that way.”

Max Lowe

Max also stressed the importance of building relationships and understanding stories before documenting them. “If I’m going to, say, Egypt as a storyteller, I want to find an in – someone who knows the place in a unique way, and within that, a unique story that defines the place and my experience there. When you’re invited by someone who calls a place home, the experience is much richer. Finding someone like that is a tremendous gift that deepens a photographer’s interpretation and understanding of the world.”

Some of Max’s film projects have required him to revisit a scene, and he found that the assumptions he made on a first pass often missed its real context, whether because he was distracted or because his own priorities got in the way.

“Understanding the context of the scene is a major necessity for an artist. Ask yourself: why are you taking that photo? Is it for the benefit of those people? If you’re a photojournalist capturing the story of refugees fleeing the war in Ukraine so that the world can understand that pain, does your work have the power to change things for the better?”

Curiosity and flexibility

Max Lowe

Max’s work is also heavily tied together by curiosity and a willingness to adapt to whatever story unfolds before him. Opportunities will come up to take that perfect shot, and one mustn’t hesitate for long to take it. One such image that surprised him in its success came from an ordinary moment in Italy. “It was just a photo of a cat sleeping on the tire of a Land Cruiser. I snapped it in passing – it was something I saw and was like, ‘Oh, that’s cute.'”

The image was made with a simple point-and-shoot 35mm film camera, and the reaction wildly exceeded his expectations. “It got this massive response on social media and ended up winning an honorable mention in a photo contest called ‘Flow.'”

Max Lowe

Max’s wildlife filmmaking has presented very different challenges. While working on a Frozen Planet II segment about snowy owls near Utqiagvik, Alaska, he ran into an unexpected obstacle. “It gets surprisingly hot because the sun is up around the clock in summer, and that heat rising off the tundra creates these distortions,” Max told us. “Atmospheric distortion made long-lens footage unusable. We ended up having to switch our whole approach on the spot, because the conditions meant the gear we’d brought just didn’t work. Camera traps certainly would have helped, but we didn’t think we’d need them when we planned the trip.”

The experience reinforced one of his recurring lessons: adaptation and flexible expectations matter more than rigid planning.

Max’s advice for photographers

Max Lowe

As I was listening to Max’s stories and adventures, there were countless gems of advice sprinkled throughout. To close out this story about Max, I wanted to list a couple of final pieces of advice that didn’t fit in the stories he told above. I hope they help you improve your photography as much as they got me thinking about mine.

The moment dictates the shot

“Many visual artists approach their work by thinking about a specific shot they want, such as a bear emerging from its den, or whatever it might be. But I approach all my work in a more freeform, creative way, whether that’s photography or filmmaking. You want to allow leeway for the experience to give you the story, instead of putting pressure on yourself to seek something out and setting yourself up for failure.”

“It can be scary to step out of your comfort zone and into someone else’s world, but it leads to much richer experiences for both you and your audience. It’s not that you should never go anywhere without a plan, just make sure you stay open to that depth when it presents itself.”

Max Lowe

Don’t ignore what’s in front of you

“It’s a mistake a lot of artists make – not seeing the value in what exists right in front of them. I’m constantly looking at the world around me, at how unique little moments occur without anyone conjuring them up. One day, I was in my office when a Western Tanager landed on a branch outside the window. Tanagers are these beautiful yellow-red birds that migrate through Montana every spring. It was such a cool moment, and I wanted to hold it forever. Find those moments and hold them forever through your photography.”

You can check out Max’s other work at maxlowemedia.com.

Editor’s note: This article continues a series, ‘What’s in your bag?’, highlighting DPReview community members, their photography and the gear they depend on. Would you like your photography to be featured? Tell us about it by filling out this form . If you’re selected for a feature, we’ll be in touch with next steps.