The Japanese Patent Office has declared one of Red’s key Raw video patents as invalid, following a challenge by Panasonic.

The court determined that many of the claims made in the patent, first filed in the US in 2008, would have been obvious to someone skilled in the subject area and familiar with existing developments.

The news, first reported by Thom Hogan, put Nikon’s video subsidiary in the position of trying to defend a patent that Nikon had previously argued was invalid.

The patent itself describes a high-resolution video camera that compresses its Raw data, and appears to correspond to the patent at the center of historic claims against Sony and Apple and the almost inevitable counter-suits from those companies. We reported on many of these challenges, as well as Nikon’s, over the years. 

Nikon famously resolved the dispute by buying the company. Some of Red’s cinema camera and Raw knowledge has subsequently been applied to recent Nikon models.

It’s difficult to know what the impact the rejection of this patent will be, given Canon, Panasonic, Sony and Blackmagic Design all now produce cameras with internal Raw video capture. One possibility the abolition of the license fees reportedly due to Red from users of Apple’s ProRes RAW codec. But given Red went from being privately held to being absorbed into Nikon, it’s difficult to get a sense for how significant these might be. And, of course, we shouldn’t assume even a minor cost reduction would necessarily get passed on to consumers.

Flashback, the company behind a digital camera built to replicate the disposable film camera experience, is advertising a “dream job” for a lucky content creator or photographer. The winner will spend up to six months in Hong Kong, fully paid, shooting content for the brand.

Flashback makes the One35 V2, a 13MP digital camera engineered to feel like a single-use film camera: it’s screenless, with a mechanical winding dial to advance frames, an optical viewfinder and a Xenon flash. Shots are capped at a 27-frame ‘roll’, after which images transfer to a companion app for ‘developing’ (with an optional 24-hour wait, a nod to dropping film at the lab).

Flashback

The company relocated its operations to Hong Kong to stay close to its Shenzhen production facility, so the city isn’t just a backdrop here; it’s central to the brand right now. The winner will be expected to produce photo and video content featuring the city.

Unlike most jobs, there’s no lengthy application process. The company simply asks for a one-minute video introducing yourself and explaining why you want the job, examples of content you’ve created and a link to your portfolio if you have one. Flashback hasn’t disclosed the compensation beyond describing the role as fully paid.

If that pitch sounds familiar, it should. Icelandair ran a similar campaign earlier this year, also built around a 60-second audition video, except it was hunting for the world’s worst photographer, on the theory that Iceland is beautiful enough to survive anyone’s bad photography skills. That one drew 127,642 entries from 178 countries, and the winner, Blanche Mortemard, walked away with a 10-day trip and $50,000.

If you shoot with any retro-inspired compact – Flashback’s or otherwise – love travel and want to get paid to document a city for six months, this could be your chance.

How to apply

Applications can be submitted through Flashback’s online form. The company hasn’t announced a deadline, so it’s probably better to apply sooner rather than later.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

Nikon has released firmware updates for two of its six-year-old DSLRs: the D6 and the D780, as discovered by Nikon Rumors. While the fixes included in them are relatively minor, it’s impressive to see last-generation models getting some love, and it speaks to how Nikon has become an exemplar of improving its cameras through software.

According to the release notes, firmware version 1.71 for the D6 fixes an issue where photos taken with older D-type lenses would “sometimes be underexposed,” as well as one where using the recall shooting feature to quickly change settings could limit your shutter speed if you were also using Auto FP High-Speed Sync. Firmware version 1.21 for the D780, meanwhile, solves an issue where the camera could underexpose images if you were zooming in while shooting a high-speed continuous burst. Both firmware updates are available to download via the company’s website.

Nikon also released a firmware update for a much newer camera, the Z50II, though its changelog makes the updates to the D6 and D780 look like complete overhauls in comparison; it basically just changes the names of some menu items in Chinese.

While all of these are minor updates, they’re illustrative of Nikon’s commitment to software updates. Ask a camera enthusiast about post-release software support, and you’ll probably hear about Fujifilm and Kaizen, but it’s worth realizing that other companies like Nikon and Panasonic have caught on. In recent years, the company has released software updates that substantially improve the capabilities of its cameras be that the addition of bird detection mode to the Z6III, a new film grain mode and support for its Imaging Cloud service to the Zf or the ability to use shutter angle in video on the Z8.

This isn’t to say that Nikon has done things perfectly. It’s easy to find complaints about how some features take longer to come to some cameras than others, when it seems like the models should be on par with each other. And  the company has, on occasion, broken things with its updates. (Its still-unfixed Content Credentials implementation for the Z6III and issues with updating cameras with third-party lenses – even licensed ones – attached come to mind.) And while these issues may stem from the practical realities of software engineering and how many resources Nikon can put into it, that doesn’t change the fact that those issues don’t make for a great user experience.

Still, it’s commendable that Nikon is continuing to support older cameras and improve its existing models. I’m sure most Nikon users would rather it continue along that path with the occasional misstep, rather than it not bother with updates at all. Now we just need that update it promised for the ZR.

Adobe has rolled out updates across Lightroom Classic (15.5), Lightroom Desktop (9.5) and Lightroom Mobile (11.5), bringing long‑requested tools like Generative Expand and improved masking controls. The August releases aim to let photographers do more without leaving the Lightroom ecosystem.

Generative Expand and Render to DNG

On Lightroom Desktop and Mobile, the headline feature is Generative Expand, which Adobe first rolled out in Photoshop in mid-2023. The tool uses generative AI to extend a photo beyond its original borders, filling transparent areas created by perspective adjustments or making room for new aspect ratios without leaving blank edges. Generative Expand is still not available in Lightroom Classic, however.

Lightroom Classic 15.5 and Desktop 9.5 also introduce a Render to DNG command in the right‑click menu, which creates a new DNG file with your current edits baked in. It’s important to note that under the hood, it’s closer to a compressed TIFF, so you lose the ability to pull extra highlight or shadow detail from the original sensor data. The feature is mainly aimed at generative workflows and for flattening complex edit stacks. For example, you can refine a crop, render that version to DNG, then use Generative Expand to grow the frame around your new composition, all without sending the image out to Photoshop.

Smarter masking and catalog resilience

Both Lightroom Classic and Desktop also gain long-requested Feather and Edge sliders for AI masks. These sliders give photographers finer control over transition softness and edge precision when using Subject, Background or Object masks. Classic also adds in‑app lrcat‑data repair, allowing the software to detect and fix corruption in the catalog’s AI data store on startup. It’s an unglamorous but important safeguard when catalogs live on synced drives or tethered workflows run hard day after day.

Mobile gets serious AI and video tools

As mentioned, Lightroom Mobile’s August release brings Generative Expand to phones and tablets, but that’s not the only update. It also adds AI Denoise to iOS devices for cleaner high‑ISO files on Apple mobile devices. Plus, Adobe’s Animate feature, which turns a photo into a short video clip, now runs on Google’s Veo 3.1 Lite model, promising faster, more efficient photo‑to‑video clips.

On both iOS and Android devices, Adobe improved handling of masks with edge refinement created on the Desktop, so edits travel more reliably between devices. Mobile also gains natural‑language search, promising to make searching for images faster. On Android devices, justified grid and collapsible segments come to Gallery view, and both platforms pick up additional camera and lens profiles. Overall, these changes nudge the phone and tablet apps closer to full Lightroom clients rather than simple companions.

Quality‑of‑life upgrades for Classic

For Classic users, the August update also allows you to adjust the photo opacity when viewing cropped-out areas, for more precise cropping. Plus, Adobe has expanded GoPro, Laowa and Sigma lens support, improved Canon tether reliability via updated PTP support and added numerous other UI and performance fixes across both Classic and Desktop. Most of these are incremental changes, but the kind that can add up when you’re culling thousands of files or relying on Lightroom as the backbone of a studio catalog.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

Viltrox is making it easier for owners of Fujifilm cameras with silver bodies to accessories. The company has announced “the silver trio” of lenses: the AF 9mm F2.8 Air, AF 15mm F1.7 Air and AF 25mm F1.7 Air for X mount, which you can now get with a coat of silver, rather than black, paint.

Apart from the different coloring, the lenses are the same as the black versions that the company released throughout last year. However, those undeniably looked like many other Viltrox lenses, which themselves have similar styling to the lenses released by other third-party manufacturers. The silver versions might stand out just that bit more, and should better match the myriad cameras that Fujifilm makes in a similar finish. It’s easy to imagine these being mounted to an X-M5, or an X-T30 III.

Despite the “silver trio” name, these lenses join another two X-mount lenses that Viltrox was also producing in silver: the AF 35mm F1.7 Air and the AF 56mm F1.7 Air. 

Of course, there will be those who prefer the black versions, and some people will scoff at the idea that anyone cares about what color their lens or camera body is, and whether those things match. There will also be those that wish the emulation of Fujifilm’s style wasn’t just skin deep, and that the lenses would include things like aperture rings, which both drastically change the aesthetic, as well as the experience of using them.

But whether it makes sense to the function over form crowd, many photographers clearly care about the color and decoration of their gear, as evidenced by the fact that Fujifilm itself sometimes sees fit to create silver versions of its lenses to sit alongside the black ones, and the frequency with which companies like Leica produce equipment in new colors. It’s nice to see a company providing these options on some of its budget-oriented gear as well; the prices vary depending on which lens you’re looking at, but they all come in under the $250 mark.

The silver versions of the lenses are available now from Viltrox’s website, at the same prices of their black counterparts. Humorously, the versions of the lenses for Sony E and Nikon Z mount are still only available in black for the time being (though neither company is as prolific as Fujifilm when it comes to releasing silver cameras).

7Artisans is making its tiny, lightweight 40mm F2.5 lens available to more shooters. The $159 full-frame option launched for Sony E-mount earlier this year after its announcement at CP+, but is now available Nikon Z mount and L mount.

The lens is the same one we saw at the trade show in February. It has a clicking aperture ring, tiny function button, 46mm filter ring and a manual focus ring, as well as a switch to go between manual and auto focus modes. The latter is provided by a stepper motor, and the lens can focus as close as 0.4m (15.7″). Despite this list of features, which is about as complete as you could hope for a compact prime lens, it only comes in at around 90g (3.2oz).

Optically, the lens consists of 7 elements in 6 groups, with one aspheric lens and three high refractive index elements. It has a 9-bladed aperture. 

Zorta / 7artisans

When the lens was announced in February, options for small, lightweight lenses were relatively thin on the ground for Z and L mount users. However, there have since been a few new options released: Panasonic announced its compact 40mm F2, and Viltrox has come out with a tiny 26mm F2.8 pancake for E and Z. Both fit into the same role as a small, walkabout lens (though obviously the 26mm offers a very different focal length), though they are also a fair bit more expensive.

The Z and L mount versions of the 40mm F2.5 are now available through 7artisans’ website, though they haven’t made it to online retailers like Amazon or B&H at the time of writing.

DJI has announced another offering in its Mic Mini lineup, the Mic Mini 2S. The new addition is a notable upgrade over the Mini Mini 2, bridging the gap to the higher-end Mic 3 with 32-bit internal recording, onboard storage and compatibility with four transmitter microphones.

For many, the standout upgrade in the Mic Mini 2S is its internal recording capabilities. The Mic Mini lineup has thus far lacked any onboard storage, meaning you don’t have a backup if something goes wrong with the device they’re broadcasting to. The Mic Mini 2S, though, offers 14.5GB of built‑in storage per transmitter, which DJI says will provide up to 28 hours of audio.

While internal recording is one safety net, the Mic Mini 2S also offers improved audio flexibility. Instead of being limited to the 48 kHz, 24‑bit wireless feed of the Mic Mini 2, the 2S can capture up to 32‑bit float, the same as the more expensive Mic 3. That mode, which uses a different way of storing audio data, makes it far easier to rescue quiet speech or avoid clipping with sudden loud noises. It also offers DJI’s two-level AI-based noise cancellation to filter out ambient noise.

The Mic Mini 2S can work with up to four transmitters per receiver with output to four independent audio channels, double what the Mic Mini 2 could manage. DJI says it also supports cross-generation compatibility, so users can pair with the Mic Mini and Mini 2 transmitters, or with the Mic Series Mobile Receiver. It’s also compatible with a range of DJI products without the need for an external receiver, including the Osmo Pocket 4, Osmo Pocket 4P, Osmo Action 6 and Osmo 360.

DJI promises up to 11 hours per charge on the transmitters, and up to 40 hours of battery life with the included charging case, 8 hours less than the total runtime of the Mic Mini 2. It keeps the typical tiny design of the Mic Mini lineup, with each transmitter weighing roughly 12 g (0.4 oz). As with other recent DJI mics, it doesn’t work as a wired lavaliere. However, it does accept the colorful magnetic front covers DJI released with the Mic Mini 2 (though those are a separate purchase).

The Mic Mini 2S is available today in most regions for £169/€189 as a bundle with two transmitters, a receiver and charging case. Unsurprisingly, it is not available in the US.

We’ve seen a recent trend of camera accessory companies building in clever hiding spaces for Apple AirTags into their products. Whether it’s a camera cage with a hole for one cut out, or a bag with a tiny pocket for them, there are more and more options for making sure you can find your expensive gear if it gets misplaced or stolen.

Falcam is taking the concept even further, building support for Apple’s Find My network into batteries for Canon and Sony cameras. For those unfamiliar, the trick of Apple’s Find My is that it uses many of the company’s products – including the iPhone – to anonymously track the location of devices on the network. This solves the issue of previous Bluetooth trackers by making it so you’re no longer relying on a relatively small group of people who use the same tracker as you and are running the app to be around the thing you’re trying to find.* The tech is what powers Apple’s ever-popular AirTags.

Falcam

Of course, the main purpose of Falcam’s TagBatts isn’t to find a misplaced camera; it’s to power the device you have in your hand. The company is making two versions: one that’s compatible with cameras that use Sony’s NP-FZ1000 series batteries (which is to say, most of the company’s modern cameras, as well as a host of other devices), and one that mimics Canon’s LP-E6 (again, supported by a wide range of the company’s DSLRs and mirrorless cameras). Falcam’s site also indicates that versions for Nikon and Fujifilm cameras are coming soon.

Both versions of the battery have a 17.4Wh capacity, which is slightly higher than the own-brand models they’re meant to replace. In an FAQ on its website, Falcam says the tracking feature uses a very small amount of power that “does not meaningfully reduce normal camera runtime,” though notes that it won’t work if the battery is completely drained. The battery also has a built-in USB-C port, letting you charge it directly outside the camera if you want, though it’s still compatible with traditional cameras and can also be charged inside the camera.

There are a few caveats to note. The first is that camera manufacturers don’t typically guarantee support for every camera feature when you’re using a third-party battery, and Falcam is new to making batteries, so it might be worth waiting for a few reviews to make sure everything works as expected. The second relates to Find My; many people will be familiar with the AirTag feature that lets you search around for your device, using your phone to point the way. This feature, however, isn’t inherent to Find My devices, and Falcam’s website makes no mention of the ultra-wideband tech that enables it on its product page for the batteries. That means they’ll be useful for seeing where your camera is on a map, but won’t help you figure out which bag you left your spare batteries in.

The Falcam TagBatt costs $70 for the Sony version and $65 for the Canon one, and they are available from the company’s website. That’s definitely pricier than competing third-party models from companies like SmallRig and Wasabi Power, but those don’t include Find My functionality. Neither do the own-brand models, which cost more.

* Though it introduces a new problem in that it’s not particularly cross-platform compatible. Android phones won’t report a Find My device’s location, and the Find My service won’t be particularly useful to you if you don’t have an Apple device. Google has its own version of the system, but the two are broadly incompatible.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

Sony has announced the FE 100-400mm F5.6-8.0 OSS, a comparatively small, comparatively affordable long tele for E-mount cameras.

Unlike its immediate peers or faster but heavier third-party rivals, the FE 100-400mm F5.6-8.0 is compatible with Sony’s teleconverters, meaning it can be converted into a 140-560mm F8.0-11 or a 200-800mm F11-16, if you need the extra reach and have sufficient light to play with.

Like Canon’s similarly-specced RF 100-400mm IS USM lens, it’s appreciably smaller and lighter than Tamron’s 50-400mm F4.5-6.3 or Sigma’s 100-400mm F5.0-6.3. At 645g (23.1oz) it’s around half the weight of either of those options, though also a fair bit slower, especially as you zoom.

The optical formula consists of fifteen elements arranged in ten groups. These include two extra-low dispersion (ED) elements and two aspheric elements. Focus is powered by a pair of linear motors (though not Sony’s smoother, more powerful ‘XD’ ones). The company says the lens is compatible with the 120fps shooting mode on its a9 III camera.

When retracted the lens is 165mm long and 78mm in diameter (6.5 x 3.1″). It accepts a relatively affordable 67mm diameter filter. It’s designed to be dust and moisture resistant and comes bundled with a lens hood.

Mitchell Clark

Although designed for full-frame cameras, it can also be used on APS-C models, giving a 150-600mm equivalent range, though its relatively slow aperture at the long end is likely to limit you to bright light working, even before you consider adding a teleconverter.

Sony tells us the FE 100-400mm F5.6-8.0 OSS is designed to offer a sub-$1000 entry point to its camera users who want to try their hands at wildlife photography or some sports shooting. Despite this entry-level position in the lineup, the lens has pair of focus hold buttons, positioned so they can be reached in portrait or landscape orientation. It also has a zoom lock switch and a focus limiter switch, that means the autofocus only focuses between 3m and infinity: preventing close-range hunting when you’re shooting distant subjects.

With the switch set to full range, the lens will focus down to 1.13m (3.7′) at the short end of its range and 0.86m (2.8′) at the long end. This gives a maximum magnification of 0.41x.

The lens will be available in September, with a recommended price of $850.

Sample gallery

Please do not reproduce any of these images on a website or any newsletter/magazine without prior permission (see our copyright page ). We make the originals available for private users to download to their own machines for personal examination or printing (in conjunction with this review); we do so in good faith, so please don’t abuse it.

Laowa has announced the Aksen, a new series of full-frame “ultra macro” lenses that together cover a 1–10x magnification range. The lineup consists of two offerings: the Aksen 45mm F2.8 1-5x Ultra Macro APO and the Aksen 17.5mm F1.7 5-10x Ultra Macro APO, each offered in both photo and cine versions.

One of the key features of both lenses is the parfocal magnification zoom design. The lenses behave like primes in terms of focal length (the 45mm and 17.5mm focal lengths don’t change), but they incorporate an internal mechanism that changes the magnification. This parfocal magnification system allows photographers to move through the 1-5x or 5-10x range without refocusing or changing the working distance. Additionally, because the zoom is internal, the barrel doesn’t extend and won’t interfere with flash diffusion or subjects.

Another distinguishing feature of the Aksen 5-10x is the option for a version with a coaxial lighting block built into the lens. It delivers high-contrast shadowless illumination, a technique borrowed from machine vision that Laowa says it is now making more accessible. It’s also similar to some of Laowa’s probe lenses, which feature built-in lights. The 5-10x lens is also available without coaxial lighting for $100 less.

Both lenses use an apochromatic (APO) design to reduce chromatic aberrations, which can be exaggerated at such high levels of magnification. Laowa says the Aksen series eliminates fringing for greater clarity. The 45mm 1-5x lens features 13 elements in 9 groups, while the 17.5mm 5-10x lens comprises 17 elements in 12 groups. Both feature an 11-blade aperture diaphragm. The 45mm 1-5x accepts 65mm filters, while the 17.5mm 5-10x uses 42mm filters.

The photo versions of the lenses come in Sony E, Nikon Z, Canon RF and EF, L mount, Fujifilm X and MFT mounts and cost $749, or you can buy both in a bundle to save $100. Laowa is also making video-focused versions with focus and zoom rings geared to work with cine equipment, though those versions are substantially more expensive.

Reports are emerging that Nikon has had one of its Z-mount patents invalidated in China, opening the door a little further to third-party access.

Nikon Rumors reports that one of Nikon’s fundamental patents relating to the Z-mount has been invalidated in China, having been challenged by Viltrox’s parent company.

The report, based on AI translations of court documents, suggests that the patent in question is one that sets out the basic physical description and behavior of the mount, constructed in a way that tries to make well-established features, such as the design to prevent incorrect mounting of the lens and a method for preventing damage to the electrical contacts sound original and novel. Patents are only supposed to protect original inventions that would not be obvious to someone working in that field.

Nikon took Viltrox to court in China earlier this year in a separate case, ostensibly to recover license fees but also, we suspect, in the hope that a Chinese court would establish a precedent of its patents being enforceable. As Professor Robert Newman explained in Amateur Photographer magazine at the time, there are at least 13 patents covering various aspects of the Z-mount’s design and operation, including one he described as relating to “a detail of the physical design of the mount, and I would be surprised if that would withstand court scrutiny.”

This description corresponds well with the details being reported by Nikon Rumors, right down to Prof. Newman’s assessment of its likely fate.

The invalidation of this patent doesn’t, in itself, clear the way to third parties being able to produce Z-mount lenses, as there are multiple other patents that describe the communication methods used by the Z-mount. Those would not be affected by this specific patent being invalidated.

It’s notable, though, that Viltrox has added to its range of autofocus Z-mount lenses since the original court case was meant to be heard. Other third-party makers, such as Meike, which briefly removed reference to Z-mount lenses from its website, also have a range of Z-mount options available again.

If, as seems to be the case, non-licensed third-party makers are feeling emboldened to produce AF Z-mount lenses, it puts Nikon in an awkward position with the companies that have been formally licensed to make lenses for the system. Those companies are presumably paying license fees and have to seek approval on a lens-by-lens basis, while their competitors undercut them without any such restrictions.

We have approached Nikon for a statement on this story.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.