Arthur Detienne

A mockup of the hero shot Detienne and his team are going for.

\On August 12, a total solar eclipse will cross mainland Spain for the first time in over 120 years, with geometry unlike almost any eclipse that preceded it. The eclipsed sun will sit just above the horizon at totality, low enough that a person can share the same frame as the corona. Cinematographer Arthur Detienne and his crew are building an entire shoot around that fact, recording an hour-long DJ set on location during the eclipse, building up to the hero shot during totality.

Because they will only have a 36-second totality window at their chosen location, every decision, including filter mounts, exposure charts and composition, has been planned out to avoid missing a single shot. Detienne sat down with me ahead of the eclipse to walk me through how they developed their plan and the gear they’ll be using the day of.

Composition begins with terrain

Arthur Detienne

After deciding on the overall vision for the shoot, one of the first steps of the planning process was choosing where it should take place. Detienne’s team chose its location northwest of Zaragoza, Spain, by balancing the eclipse’s position, the landscape and the odds of clear skies. That’s because of the specific vision for the hero shot, which needs the sun low and large at sunset, with a performer placed between it and the camera.

Detienne told me that they calculated they would need roughly 100–150 meters (328-429′) of distance between the camera and the subject, plus a specific elevation difference to align the silhouette with the eclipsed sun. Their current location allows for about 105 meters (344′) of separation and 6 meters (19.7′) of elevation.

Cloud risk also shaped the decision. The crew used The Eclipse App to compare historical cloud-cover probabilities along the path of totality, choosing an area Detienne said had a 5–10% chance of clouds rather than 60–70% in some alternatives.

Arthur Detienne

They also considered atmospheric shimmer: because the eclipse occurs near sunset, the low sun’s light will travel through a thicker layer of atmosphere, making a long-lens image more vulnerable to distortion. The selected area includes a large body of water beyond the setup, which the team hopes will provide more stable conditions. “There is no perfect choice,” Detienne said. “It’s always dealing with constraints.”

While some creatives choose a location for aesthetic reasons, that was not the case here. “It was not a very creative choice,” Detienne said. “We need very special conditions.”

Previsualizing the hero shot

The entire video will be an hour long, but the moment at totality is the star of the show and the primary focus while deciding on composition and gear. During the planning process, Detienne’s team used set.a.light 3D to model the planned eclipse composition. The software allowed the crew to enter the date, location, camera setup and predicted sun position, then preview how the performer’s silhouette could align with the eclipsed sun.

That process helped the group refine its lens choice, camera placement and performer position before traveling to the site, helping to take as many variables out of the equation as possible. Engineers reviewed the team’s calculations, but Detienne said the simulation remains a starting point rather than a guarantee. “It’s still assumptions, we will need to verify that,” he said, which is why the crew has set aside the day prior to the eclipse to verify the composition on location.

Calculating exposure

Arthur Detienne

The crew can test its framing and filter workflow in Spain, but the exposure transition at totality remains an educated calculation. Before and after totality, solar filters will protect the cameras from direct sunlight. During totality, when the sun is roughly 100,000 times dimmer, the filters must come off to reveal the corona.

Detienne’s team used Fred Espenak’s eclipse exposure references as a starting point, then ran additional calculations for the sun’s low altitude at sunset. At that angle, sunlight travels through more atmosphere than it would higher in the sky, changing the expected exposure. Engineers also reviewed the team’s numbers, but Detienne said the final settings cannot be fully tested in advance. “The reality is, we cannot test that. So the biggest risk right now will be that one,” he said.

Speed is critical. The team built custom filter mounts intended to come off almost instantly, preserving as much as possible of the 36-second totality window. They also need to reinstall the filters as direct sunlight returns: Detienne said their calculations suggested an unfiltered long-lens camera could suffer sensor damage in roughly seven seconds.

Reach and stability for the hero camera

Fred Espenak

The hero camera will pair a Nikon Z8 with a 600mm lens and teleconverters, bringing the optical focal length to roughly 850mm. Recording in 8K will also give the crew room to crop to a 4K deliverable, producing a framing Detienne estimates as equivalent to about 1700mm. That reach is central to the composition, enlarging the eclipsed sun behind the performer.

The camera will sit on a weighted Sachtler 20 S1 tripod to limit vibration at that focal length. Detienne said the team will keep the hero camera locked off rather than track the sun: “We want it to be focused on the subject,” he said. “The sun will just go behind them.”

The crew will also test whether to disable in-body and lens stabilization, which can sometimes introduce movement when a camera is already on a highly stable support. Drones, wider-angle cameras and gimbal rigs will provide additional angles for the hour-long live session, but Detienne said, “What we want people to remember is this hero shot.”

Testing the plan against reality

Arthur Detienne

The day before the eclipse, Detienne’s crew will gather at the location for a full rehearsal with the actual equipment. They will verify their calculated camera and performer positions, check whether the planned elevation needs adjustment and test the manual workflow for focus, white balance, exposure and stabilization.

Weather remains the variable no rehearsal can resolve. Detienne said the rapid temperature change around totality can produce clouds within minutes, potentially obscuring the sun just as the shot begins. Historical cloud-cover data helped the team choose its primary area, and it has identified backup locations, but none can guarantee an unobstructed view.

“There are a lot of unknowns. We cannot avoid them,” Detienne said. “But we intend to minimize them.”

A plan put in action

By the time totality begins, the crew will have dialed in the location, the camera position, focal length, filters, exposure estimates and the sequence for removing and replacing those filters. Their preparation is meant to give them the best chance at getting the shot, but it cannot guarantee the sky will cooperate or that everything else will go according to plan.

For Detienne, that uncertainty is part of the appeal. “I think we can really bring art and nature more together,” he said. “Nature is a very cool and good way to interact with art.” We’ll be eagerly waiting for the results and look forward to seeing all of the incredible photos and videos from this eclipse, including some from you, our readers.

Leica’s product manager for the SL series cameras, Gerrit Gissel describes them as the company’s “technology lighthouse:” the thing that acts as a guide for all the company’s other efforts.

We spoke to Gissel about the SL3-P, who it’s for, how it fits into the lineup, and the challenges of creating a product with more direct rivals than most of the company’s other offerings.

“We see there’s a big potential out there of photographers who just want to have the best technology available, and for us the SL system is the answer to that demand,” he says: “But there are more layers to that.” 

“There’s also an internal perspective where we use the SL system to develop new technologies to see how far we can push certain things, that we then later benefit from in other product lines. Especially in the Q series we see many similarities, but then also in other compact cameras. So the SL is the camera where we develop that, where we invest a lot in, then we can benefit from later on.”

The user interface is an example, he says: “I think we have a quite recent example for that with the SL3 generation. We have for the first time implemented our new user interface that now, last December, was also integrated into Q-Series because we got the feedback from our customers and we carefully listened to them that they liked it a lot. They think it’s very well thought through and also cameras like the Q series could benefit from that.”

Setting the SL3 series apart

We asked whether the company has to approach the SL series differently, given it has more direct competition than the Q or M cameras.

“Well of course we do lots of benchmarking. We know, especially in reviews etc, that we are compared with each other so, whether we want that or not, we will be compared.” says Gissel: “So that’s why we focus on finding our own our own position in that competition out there. We find our our own language, that I think we found quite well with the SL system: being user intuitive, user friendly, not overloaded with features, and just allowing the photographer or videographer to focus on his or her work. This is a bit like the credo that we are following. And of course every decision; feature versus added complexity, is discussed having this in mind.”

This focus on operability, as well as build quality, emerge as two of the things that can set the SL apart, beyond hardware specifications: 

“So the obvious thing is the operation. You will see that immediately once you’re touching the SL, and I think that makes your job so hard because you have to write about it, you can show some pictures, but to really understand that you have to have to touch the camera and feel it.”

But there’s another critical factor, he says:  “of course what is probably the thing we invest the most in is defining and refining our image quality. So if you see the results at the end, then you can understand what the Leica SL system is, compared to the other ones out there. So the way you create and the result in the end, neither thing is particularly visible when looking at a technical data sheet.”

Gissel’s comfort with the SL3-P not necessarily having every possible feature that its hardware would allow, seems in part to come from the confidence that Leica understands its customers well. “It always depends on whom you are designing for. When you try to please everyone, of course you have the tendency to bring all the features in there. I think we have a bit of a clearer mind to our customers. We know our customers maybe a bit better than others and that’s why we can design our solutions a bit more specific maybe and probably it’s easier for us to sometimes say ‘we don’t need that’ because we know that the majority of our customers would be more confused by that than it would be actually helpful.”

This understanding comes from two sources, he says. “one is the, let’s say, the old fashioned, but still very important, way: we just travel around, we visit our stores. I mean we have the big advantage that we have our own store network with people that are in daily interactions with our customers and our salespeople there, and sometimes also when we meet customers there they give us very valuable one-to-one feedback. So we try to do this as much as possible and this always brings value.”

“And then we have a more systematic approach. We have a database, we have a strong customer care department, and capture every feedback and feature request. Also some complaints. They are all tracked in that system, they are tagged to which system they apply so that we really systematically sometimes can say ‘okay this and this feature was asked for by so many people’ so we prioritised this over another one.”

Looking beyond existing customers

But what about the people who aren’t current customers, we asked. “We have one mechanism I didn’t already mention: we do customer research where we not only ask our own customers about their current thoughts and their future wishes but also try to get in touch with people who have cameras from other manufacturers,” he says: “but also even people who are not into photography yet or who are smartphone users that just have a certain tendency. We try to get in touch with these people too we then have professional support to do these surveys, and this is part of our of our work too.”

The importance of this comes through as we discuss our experiences of learning how the camera works: “I think getting this right is important” he says: “I think this camera is very attractive for people who haven’t considered a Leica to switch to us.”

Technology and tradition

The SL3-P came about as much through technology making it possible, as through customer feedback, he suggests. “The bigger portion [of SL buyers] is always the non-S, high resolution variant, so the SL2 and later the SL3. And we just saw that we could, compared to these two cameras, massively improve the autofocus capability. The SL3-P is a bit of a specialty in that customers didn’t know that we were thinking about bringing a third variant in one generation. So this is kind of a of a novelty, right? And that’s why here the decision also came from we saw what will be possible technology wise and we added that to the customer feedback.”

That possibility comes primarily from the fast, high-resolution sensor becoming available, he says. “It’s always the combination [of sensor and processor], so neither of both parts is powerful alone. But if we compare the main difference between SL-3, SL3-S, SL3-P, it is this time the sensor because they all share the same processor platform.”

But creating a new model entails a lot more than just simply changing which sensor sits in the camera, he says: “both in the hardware and software, many things have to be rethought.” 

“You think you would only swap the sensor, but in fact you have to re-think every component of the camera once again. ‘Does that still match?’ ‘Does that still make sense?’ And ‘is this, for the use case we intend this camera for, still the right fit?’

“I have a good example for that for the SL3-P in in a software solution that we came up during a running project.” he says: “So we knew if we integrate this sensor, we knew that we will get a more complex and powerful video setting possibilities. And we ended up with one hundred and fifty seven video options. We then decided we need a more intuitive, dynamic way to select these video settings because otherwise our consumers could be overloaded. And that’s why we came up with the new video setting selector, which was very well received by everyone who’s was testing it. But that was a result out of the decision to go for that new sensor.”

With all this in mind, we circled back to one of our original questions: what does Leica do to ensure the SL offers something distinctive in a crowded, competitive market?

“It consists of, I would, say two elements that if you hear them, at first not are really logic with each other,” says Gissel: “The first is keeping the the heritage of both Leica and what we have achieved with the SL system over the past ten years. So excellent haptics, superior image quality, of course, things like our very strong viewfinder, IP54 rating, so everything the system was known for.” he says: “And then on the other hand, innovation. I’ve learned from my colleagues who have been here much longer than me that innovating and reinventing is also part of the Leica DNA, so that’s why it’s maybe not a contradiciton to combine these two things with each other.”

For example: “the improvements we’ve made with the autofocus in the in the past years, they are just like a reinvention,” he says: “it’s such a big improvement we considered whether it should sit apart from the existing SL3 models.”

After more than a month of drama, the 2026 FIFA World Cup is finally heading into its finale, with the last games set for this weekend. Over the course of the tournament, a small army of photographers has been crisscrossing stadiums to keep pace with the matches and the stories unfolding around them.

One of them is Maddie Meyer, a Getty Images staff photographer who has spent this World Cup on the touchline and in the stands, documenting everything from tunnel nerves to wild celebrations. Meyer took the time to speak with me between matches, sharing insights into what it’s like to cover such an event and how she stays on top of her game.

Finding her way

Getty Images

While Meyer was always interested in photography, she didn’t start out wanting to be a sports photographer. She grew up in Washington, D.C., playing soccer and thinking she would follow the path of Doug Mills, a prominent New York Times photographer she’d known since childhood. “I’ve known him since I was 8, and I looked up to him so much,” she said. “I remember his pictures from the Torino Olympics and thinking this might be the coolest thing I’ve ever seen.”

Meyer recognizes that having Mills to look up to early on was quite important for her path. “It was so cool to have somebody in my life so early to show me this is a job you can have,” she told me. “He was super encouraging; he said the only difference between me and you is I’ve worked hard at this for 40 more years.” Meyer kept shooting through middle and high school and went on to study photojournalism at Ohio University.

She still thought she wanted to be a White House photographer until she started working with her college athletics department and realized how much she loved traveling with teams and being outside. That led her to apply for a Getty Sport internship in New York City, which quickly felt like the right fit. “I loved the pace and the scale and the intensity of it. After I graduated from college, I got hired in Boston in 2015. I have been here ever since, and I still love it,” she said.

Managing the chaos

Maddie Meyer – FIFA/FIFA via Getty Images

At this point in her career, Meyer is no stranger to long days and constant travel, but this World Cup has been especially demanding, with matches held in 16 cities across 3 countries. Group play was the most intense stretch, with 50 Getty editorial photographers bouncing between host cities to cover 72 group‑stage matches. “We were traveling the day of sometimes, so it was like, wake up, take a flight, check into the hotel, head to the stadium,” said Meyer.

Once she’s at the venue, the workday around a single match stretches to roughly 10 hours. Meyer said that the Getty team at a game (generally two to three photographers during group play) typically arrives about five hours before kickoff. They start by setting up remote cameras behind the goals and photographing the dressing rooms. When the teams arrive, the atmosphere shifts quickly. “Some of the African teams come and actually sing down the tunnels and the hallways with drums, which is really cool,” she described. “So I love that right off the bat, sometimes you get a really interesting cultural taste right away.”

From there, Meyer follows the team as they walk the pitch and go through their warmups, then moves into one of her favorite moments: the tunnel. “What I really like is getting access into the tunnel, where there aren’t other photographers, so to me, those are some of the more genuine moments that we see of these athletes before they step out and see these tens of thousands of people,” she said.

After the final whistle, one member of the crew typically goes out on the pitch with a steadicam. “I really love getting closer to those players, whether it’s the celebration, the dejection, it feels a little bit more intimate than using those really long lenses to photograph the action,” she said. They wrap up the day by capturing the press conferences and packing up before heading to the next city.

The long hours and frequent travel can wear anyone down, so Meyer leans on small rituals to keep herself steady. including bringing small things from home and making time for movement. She likes to bring a few comforts from home and find regularity where she can. “I love having my good-smelling soaps in the shower, little things that make me feel like I’m not just sitting in the rain in my raincoat all the time,” she explained. “I also always try to get some sort of exercise in, either walking or in the gym, just kind of moving my body, because most of the time, we’re kind of curled up in these weird positions.”

She also explained that sleep is non-negotiable. “I really believe I can do anything in the world if I have 8 hours of sleep,” she said. “I tell my colleagues, too, listen, if we’re not sleeping and we’re running between places, let’s be really gentle with each other the best we can, because we’re running on fumes sometimes.”

What goes on behind-the-scenes

Maddie Meyer – FIFA/FIFA via Getty Images

Meyer and her teammates certainly have their hands full during an event. She told me that she typically has four cameras in action during World Cup matches: one remote camera behind the goal, and three on her. She usually fits those handheld cameras with a 400mm lens, a 70-200mm, and, depending on her placement, something wide-angle to catch close action. Across the team, there are multiple remotes behind each net, all positioned to cover key moments around the goals.

Before kickoff, Meyer sets up the remote camera’s exposure and focus, making sure it’s ready for action near the net. She explained that the remote cameras behind the goals are hardwired, as there’s far too much interference to rely on wireless connections during matches. It is still manually triggered, either by remote editors or by someone nearby using a foot pedal.

From the opening match on June 11 to the final on July 19, the Getty Images team will have shot more than 2.6 million images. Thankfully, the photographers aren’t working alone. The Getty Images FIFA World Cup team consists of 115 people, including 20 editors in New York who help oversee operations and are ready to receive images as they come in.

“They have a diagram of where everybody is. So after a goal is scored, they’ll say, ‘Oh, that’s in Maddie’s corner, take a look at what she’s sending us.’ So they’re able to prioritize whose work they want to look at to get those pictures out quickest,” Meyer explained. She works under a “tag and send workflow,” meaning she looks through and sends pictures that she wants the editors to see, often within seconds of something happening.

The remote cameras are handled differently. Those are set to send all of the images to New York as soon as the cameras fire. Once the editors have the photos, they crop, tone, caption and send the pictures out for use. A Getty Images representative told me that they can have photos ready within 30 seconds of capture, often before television replays are available.

Meyer explained that the current process is vastly improved from when she first started. “In 2015, I photographed the Women’s World Cup, and it was self-edit, so I had my laptop out on the sideline, and it was super challenging,” she explained. “Versus now, it’s just such a win for everybody. The editing team does a way better job than me out in the sun, squinting into my laptop. And also, I’m able to shoot more and really focus on the game.”

Staying prepared

Maddie Meyer – FIFA/FIFA via Getty Images

With so much happening around each match, Meyer tries to go in as prepared as possible. “I think it’s always great to understand the key players and some of the storylines,” she said, noting that her European colleagues have been especially helpful since they see many of these players regularly and can flag people to keep an eye on.

More than scouting, though, Meyer focuses on her particular location for the match. “We’re assigned where we’re shooting, and so I really think about the backgrounds, how the game is gonna kinda flow,” she said. She went on to explain that she’s also very intentional about which moments are hers to photograph, versus ones that are better for her colleagues to capture. “I really think this is my little piece of the pie, this portion of the field,” Meyer said. “I’m gonna really think about what lenses show off what’s going on here.”

Meyer said she also thinks about her mom a lot when photographing. “She’s a big Maddie fan, but not a big sports fan,” she said. “And I always think, what would I tell her about today? What makes this different? What makes this interesting? What makes this special?” She uses that mindset to make sure she’s telling the bigger story, making it interesting for more than just die-hard soccer fans.

Another challenge Meyer faces is making her pictures feel distinctive. “Sometimes the photos do end up looking the same as the person sitting next to you,” she explained. “I try to think about lens choices – can I shoot really wide to show atmosphere? Tight to show details or faces? A very shallow depth of field to highlight the action? That can be where the difference comes into play when our position can’t be unique.”

A favorite moment on the world stage

Maddie Meyer – FIFA/FIFA via Getty Images

As the 2026 World Cup nears its end, Meyer doesn’t hesitate when asked about a favorite moment from the tournament: the Egypt–Argentina match. She was roaming rather than in an assigned spot on the touchline, which she said presents a fun challenge, since she can go anywhere and doesn’t have set compositions and backgrounds in mind as she does otherwise.

There had been lots of back and forth, but Egypt was up towards the end. She got a message saying they would have access to the Egypt locker room, asking whether she would go in with them if they won. “I was like, okay, do I leave before the match is over to wait outside their locker room, or do I stay up a little bit longer?” she recalled. Then, Argentina scored, and she decided to go with the Argentina fans and figure out how to get to the locker room later if she had to.

“The Argentina fans are incredible,” she said. “These people are so passionate. They travel so well. They have the instruments. They’re just out of their minds in the best way that you want to see.” She also told me that she loves how much they want everyone involved, and they are not shy about having a photographer in their midst.

“They ended up winning, crying, shirts off, screaming, and I have all these pictures with a 15mm, and all these people, it’s like, babies, old men, young people, and that was super memorable to me, of just kind of being in that chaos,” she said. “Being on the pitch, it feels pretty high pressure as a photographer, but up there, I was like, I’m in this. And they’re like, ‘Get in here, sister!’ I’m like, okay, I’m not celebrating. I’m gonna photograph you celebrating. One of the guys took my phone and was like, ‘I’m taking pictures of you!’ It was just, like, the rails have come off up here.”

For Meyer, that moment captures a lot of what makes the World Cup special. “What I think is so fun about the World Cup is just how passionate these people are, and getting to be maybe a little bit too close to them even was great,” she told me.

Beyond the World Cup: why the small games matter

Maddie Meyer – FIFA/FIFA via Getty Images

While Meyer is photographing on the big stage these days, she is quick to stress that professional events aren’t the end-all, be-all. “Even though I love being at the World Cup, it’s not all about the World Cup,” she said. “There’s so much joy, and sometimes, frankly, better pictures in the smaller events, in the high school, in the college, in the MLS, NWSL, all those types of things.”

It’s a good reminder that although big events like this get most of the spotlight, smaller events are important, too. “As much as I love it, and I love talking about it, I never want people to leave talking with me, thinking it’s this or nothing, because there’s a picture to be made at every single level,” Meyer said.

You can see more of Meyer’s work on her Instagram or through Getty Images.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

Capture One has built its reputation as the professional standard for commercial and beauty photographers thanks to its precise color management and tethering tools. But the company is also in the midst of an expansion, adding tools for new types of photographers, from photojournalists to those working with film.

We sat down with CEO Rafael Orta to talk about what that growth looks like, how the company approaches AI, and how it differentiates itself from other editing platforms.

Who it’s for

Capture One

While some editing platforms aim to serve everyone, Capture One is intentionally more narrow in its scope. Orta is clear about who the company builds for: photographers who have made photography their career choice, whether as a primary income source or a serious secondary one.

The professional lens shapes everything from feature priorities to how the company talks about its product. Capture One is often considered the commercial standard for beauty and product photography, but Orta says it has deliberately expanded into professional portrait, wedding and family photography in recent years as well. It’s also seen lots of growth in its enterprise segment, with the Associated Press coming on as its first photojournalism client last year.

The key is that all of these are genres where client relationships and deadlines can define the work. “We have a really good understanding of how photographers work with clients, work under deadlines and how clients are the ultimate judge of your work,” Orta says. “It’s a tool that has been built with professional standards in mind.”

AI on its terms

There’s no getting around the fact that AI is everywhere these days, and it’s reshaping many aspects of the photography software market. But Orta is careful about how Capture One positions itself within that shift, and it comes down to trust in the company’s identity. “We are not confused about who we are,” he says. “We are a photography company first, not a software company that happens to serve photographers.”

That identity, according to Orta, is what allows the company to incorporate AI responsibly. He tells me that Capture One owns more cameras than it has employees and that many of the photos on its website and in its marketing are taken by Capture One team members, who are photographers. “We are incredibly protective of usage rights; even in internal presentations, you need to credit the photographer,” he explains. The company also runs a monthly internal photography competition with winning images adorning the walls of their offices.

Orta explains all of this to make it clear that AI tools in Capture One are built by people who take photography seriously; they aren’t added simply to keep pace with competitors. “It’s why we’ve been able to bring AI into Capture One without the backlash others have faced,” he says. “We built it as a participant in the industry, not an operator standing outside it looking in,” he says.

A pulse on the community

Earlier this year, Capture One released a negative film conversion feature. While this could seem like an odd move for an editing platform dedicated to commercial work, Orta sees it as the perfect example of how in-tune with the industry the company is.

“It’s the perfect example of our connectivity in the industry,” Orta says. “We saw early on that there was a resurgence of film photography, and it quickly began to enter the commercial space.” He explains that they want to offer a better way for commercial photographers to integrate all their work into a single platform. Doing so enables photographers to maintain a more consistent workflow and create a more coherent look across both film and digital.

Orta is also clear about how intentional the company is with new features and the work involved in creating those. “We are soaking in the industry, and we listen and respond to the requests,” he says. “But because we’re precious about quality, some of these things may take a bit of time. We spent the best part of two years on negative conversion to make sure the results would be good.”

As an example of how dedicated the team is to its new features, Orta tells me that a few weeks ago, the company held its annual gathering and handed out disposable film cameras to everyone there. Now, the employees are using the negative conversion tool to scan in their own negatives. It’s another example of the team getting real-world experience with the features they develop.

Pricing adjustments

Capture One

Capture One has never been the cheapest option for photographers, and recent pricing increases have made that especially true. The editing platform has raised its prices twice in recent years, and another 6% increase took effect this month. The new price is more than double the cost of Adobe’s Lightroom, a gap that is certainly hard to ignore.

Orta doesn’t shy away from the pricing question, though. “What we have committed to is yearly pricing increases, and we will do them in a modest way,” he says. As for the why, Orta simply cites inflation and foreign exchange as factors in the decision.

Naturally, he points to what subscribers get in return. Orta says that Capture One has been pushing more than one update per month to at least one of its platforms, bringing a constant stream of improvements. He explains that these include server-side updates to things like its collaboration tools (Live, Live for Studio) and admin platform, not just desktop and mobile app updates. Some of these updates are visible to a user, while others aren’t. He adds that the company has simplified its product lineup in recent years to make pricing tiers clearer. Overall, Orta frames the increases less as a burden and more as a reflection of ongoing investment in the product.

A clear vision for the future

For Orta, all of Capture One’s recent changes, including the newly added Hasselblad support, point in the same direction: a company that’s clear on who it is and who it’s building for. “We try to serve specific genres and build products and services that are perfectly adapted to the needs of each one,” he says. For a company with its roots in commercial studios, that’s a wider net than it used to be, but it doesn’t mean that the focus is any less intentional.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.

Stuart Palley

When Stuart Palley began photographing California wildfires in 2013, the data already pointed toward more serious wildfire problems ahead. Over the next 13 years and nearly 200 fires, he watched that prediction come true. Fire seasons grew longer, fires burned faster and more aggressively, and January 2025 brought an inferno to the hills of Los Angeles at a time of year that usually felt like a safe time.

Through all of it, Palley has been there with a camera, building a visual record of the American West’s fire crisis. I had the opportunity to chat with him about his journey capturing wildfires, the toll it takes and Terra Flamma, his current ongoing series dedicated to a fresh perspective.

Fire as light

Stuart Palley

While Palley is still very focused on the journalistic side of his photography, his Terra Flamma series blends the boundaries between documentary and fine art. The project involves using long exposures to photograph fires at night, and Palley was drawn to making these images in part because of the colors they allow.

Palley explained that he frequently thinks about a quote from Vincent van Gogh, who said, “I often think that the night is more alive and more richly colored than the day.” Van Gogh’s paintings, like “The Starry Night ,” were direct inspiration for Palley’s fire-lit nightscapes. “That use of color and night scenes just always stuck with me from growing up, and I just loved access to the color palette that wasn’t otherwise available,” he said.

Stuart Palley

The images grasp onto that idea, showcasing landscapes in a manner we don’t often see. “Fire is its own light source, and it bathes everything in this warm light,” Palley explained. “When you add in smoke and other geographic features, it can either be an enormous warm softbox, or it can paint everything in orange and red, and then contrast it against a more blue or purple night sky. So it creates this incredible color palette that is only available when the fires are happening.”

Terra Flamma isn’t just about color, though. The long exposures give you a different look at the fire’s behavior, too. “You see what it’s doing, you see where the smoke’s going, and it sort of illuminates the scene,” said Palley. The long exposures also showcase the landscape, providing a bigger view of the situation. “Ultimately, the goal of Terra Flamma is to take these landscape photos of fire and put them in the context of where they are,” he said. “Is this happening in the mountains in the middle of nowhere? Is it happening near downtown LA?”

Stuart Palley

Palley has also expanded the series to include stories beyond the fire itself, including firefighters, crews, communities, air quality, forestry management and more. “The fire has become part of a broader ecosystem when it comes to storytelling about climate and natural disasters here in the American West,” he told me.

While Terra Flamma occupies the fine art end of his work, it represents only part of what Palley does at a fire. During the day, he’s working as a photojournalist documenting firefighters, crews and affected communities with the same immediacy as any news photographer. The long-exposure landscapes come when the sun dips down.

Putting gear in the line of fire

Stuart Palley

Of course, long exposures create logistical challenges that daytime images don’t. Fires are dynamic and can change rapidly, and setting up for a long exposure requires time. Thankfully, most of his long exposures give him the benefit of distance as a safety buffer. “A lot of times when I’m doing these longer landscape exposures, it’s from further back, looking at the fire in context across a canyon or down a hill,” he said. “So, I typically have some space built in that gives me both geographic safety and the time to make these images.”

That’s not always the case, though. Palley remembered one image in particular where he was much closer to the fire, with a 30-second exposure capturing embers swirling around him. “I had to stand there holding my camera in the wind, getting pelted by embers,” Palley said. “I’ve got like a hood, a helmet, goggles and all this stuff. So, I was fine. But I decided at that point that it was worth making that picture because it showed the ember cast in such a wild way that it was worth sitting there for the 30-second exposure.”

Stuart Palley

Thankfully, fires haven’t been the direct cause of damage to Palley’s gear. “I’ve certainly damaged and destroyed multiple cameras at these fires, but it’s not necessarily from negligence,” he said. He recalled one time in 2015 when he dropped his camera after getting attacked by a displaced beehive because they were attracted to his yellow Nomex suit. Another time, he melted a lens hood because it fell into burning grass.

The most common issue, he says, is smoke. “The cameras smell like ashtrays,” he said. “You get smoke and ashes on it, but you get alcohol wipes, and you wipe the cameras down every day to reduce smoke exposure and things like that.” He also sends them off yearly for a cleaning to maintain his gear. “But ultimately, it’s a tool and tools used in challenging conditions just often need more maintenance,” he explained.

Training is key

Stuart Palley

While Palley, of course, wants to create incredible photographs, he draws a clear line. “The key thing here is no photo is worth me getting hurt or getting in the way of firefighters,” he said. He’s always putting his safety and the job of firefighters first.

That focus on safety has only increased over the years, too, as fires have become more intense. “I’ve always been safety oriented, but I’m very, very conservative now on how I approach these fires because the fire behavior is so extreme,” he said. “From having been at almost 200 wildfires at this point, the fire behavior continues to surprise me with how aggressive and rapid it is.”

Stuart Palley

Palley’s safety record is no accident. Since early on in his career, he has devoted a lot of time to making sure he is well-trained, knowledgeable about fires and has the right gear. “When I first started photographing fires, I had basic Nomex PPE, but the boots didn’t quite fit right. I didn’t have the right fire shelter,” he told me. “So within the first year, I went to a private wildland fire school for a week to get my general wildland firefighter training.”

He’s also careful to continually update his gear so that it meets current standards. For example, he recently purchased a $3000 radio because many agencies have updated their radios, and he needs an easy way to listen to what’s going on to stay safe and out of firefighters’ way. “When I’m at fires, I want to be there to tell the story, not become part of it,” he said.

Stuart Palley

Palley has also started sharing his knowledge with others. He recently led a two-day wildfire media safety course for 20 Reuters staffers and freelancers. “It’s a blend of some very general wildland fire behavior and training that’s standardized for firefighters, but it’s sort of customized in a curriculum I just developed to teach journalists,” he explained. That information can then help other journalists stay safe, while producing informative coverage of these events.

That directness extends to how he talks about irresponsible coverage more broadly. Palley is a genuine believer in the democratization of media and is all for more people covering these events. But he has little patience for journalists or creators who treat dangerous situations carelessly. “When I’ve seen so many extreme fires, fatality fires, homes burn down, I don’t have time to sugarcoat these explanations,” he said. “Sometimes you have to just be direct and tell people to get their shit together. This is serious stuff happening. It needs to be taken seriously.”

Building trust and the ethics of wildfire photojournalism

Stuart Palley

Trust is also a factor when photographing these fires. Palley is often working in the vicinity of firefighters, and they need to know that he’s not a liability and that they can trust him to be responsible and safe. “If you’re a journalist there, to a wildland firefighter, you’re the X-factor,” he said. “Trust is one of the biggest things, and that’s the reason why I’m big on having the right gear and the training and knowing how to use it.”

Trust extends beyond wildland firefighters and safety crews, too. Palley often photographs communities when people return to their homes after fires, a traumatic and emotional experience. “When you’re photographing people on the worst day of their lives or the most stressful day of their lives, sometimes they don’t want that to be photographed,” he described.

“I want to respect the dignity that people deserve in these situations and build that trust,” Palley said. Because of that, he gives people space when requested, moving on to other areas and photographs. “To me, that’s more important than making that picture,” he told me.

The cost of the work

Stuart Palley

Palley considered conflict photography early in his career before deciding against it, in part because of the mental health toll he knew it could take. The irony is that wildfire photography has its own cost.

“Journalists deal with vicarious trauma, and if it’s not treated, it essentially develops into PTSD,” he said. He’s clear about what the work actually demands. “When these fires happen, you’re working 16, 18-hour days on assignment. It’s just very intense,” he said. “The human body and mind are not designed for that level of stimulation for that amount of time.”

There’s been a growing movement in both journalism and the firefighting world to acknowledge this, and Palley learned it firsthand. In 2023, he was feeling the burnout and stepped back from photographing fires for about a year.

Chiara Dollak

Recovery, for him, has meant therapy, stepping away from social media during intense fire periods and making space to decompress. “When it’s been a really intense fire reporting period, just kind of be present, literally touch grass, rest, get away from the digital screen,” he said.

The cost of this work is real, but so is Palley’s commitment to it. He returned to the fire line when the LA fires broke out in January 2025 and hasn’t stepped back since. For those looking to stay informed, he recommends Watch Duty, a free nonprofit app he volunteers for that sends real-time alerts about fires and evacuations across the United States.

His parting advice, after 13 years and nearly 200 fires, is straightforward: “If you’re worried about a fire and you haven’t gotten an evacuation order, you don’t have to wait for an evacuation order to leave. You can always leave.”

You can follow along with Palley’s work on his Instagram , YouTube channel and website .